How to configure Concox GV500MAP tracker

The Concox GV500MAP tracker is an advanced solution for vehicle monitoring and tracking. Configuring this device is essential to ensure effective and optimized operation. In this guide, we will cover the fundamental steps to configure your tracker, including setting up the APN, DNS server, and IMEI, as well as conducting tests to verify that everything is working correctly.

Setting up the APN is one of the first steps, as it is responsible for connecting the device to the mobile data network. Next, you will need to define the DNS server, which allows for domain name resolution, essential for the proper functioning of the tracker. The IMEI, in turn, is a unique identifier that must be configured for the tracker to operate securely and efficiently.

After configuration, it is crucial to conduct tests to ensure that the device is transmitting data correctly and that all functionalities are operational. This step ensures that you can make the most of the features of the Concox GV500MAP.

For a complete and practical experience, use the Trackar platform, which offers a one-time payment service, allowing for simple and effective monitoring of your tracker.

SMS Commands

1. Factory Reset

To perform a factory reset of the device, use the appropriate command. This process will restore all settings to factory defaults, which is essential for troubleshooting or reconfiguring the device.

AT+GTRTO=gv50,4,,,,,,FFFF$

2. Time Zone Configuration

It is important to adjust the time zone to ensure that location data is accurate. The following command should be sent to correctly configure the device's time zone.

AT+GTTMA=gv50,+,0,0,0,,,,,,FFFF$

3. Carrier APN Configuration

Configuring the APN (Access Point Name) is crucial as it varies according to the carrier. Make sure to enter the correct information to ensure the device's connectivity.

AT+GTBSI=gv50,agilis.algar.br,agilis,agilis,,,,,FFFF$

AT+GTBSI=gv50,allcom.br,allcom,allcom,,,,,FFFF$

AT+GTBSI=gv50,datacard.nextel3g.net.br,,,,,,,FFFF$

AT+GTBSI=gv50,datelo.com.br,claro,claro,,,,,FFFF$

AT+GTBSI=gv50,jbgprs.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv50,linksolutions.br,link,link,,,,,FFFF$

AT+GTBSI=gv50,m2data.arqia.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv50,m2data.vivo.com.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv50,smart.m2m.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv50,ss.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv50,tim.br,tim,tim,,,,,FFFF$

AT+GTBSI=gv50,transmeet.br,transmeet,transmeet,,,,,FFFF$

AT+GTBSI=gv50,upchip.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv50,voxter.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv50,voxter.algar.br,nlt,nlt,,,,,FFFF$

APN, username, and password information must be updated according to the carrier used.

4. DNS and Port Configuration

To ensure proper communication of the device, it is necessary to configure the DNS and port. Use the commands below to enter the server data.

AT+GTSRI=gv50,4,,2,central.trackar.com.br,5004,,,,0,0,0,1,,,FFFF$

5. Sending Interval Configuration

Adjusting the data sending interval is essential to optimize the device's communication. The following command allows you to configure the time and sending angle.

AT+GTFRI=gv50,1,0,,0,0000,0000,,60,200,1000,,20,3300,,,,,FFFF$

The communication interval is set to 60 seconds with the ignition on and 3300 seconds with the ignition off.

6. External Battery Configuration

To ensure the proper functioning of the external battery, use the command below. This will help optimize the device's performance.

AT+GTEPS=gv50,2,1000,28000,2,3,0,0,0,0,1,30,30,,FFFF$

7. Global Settings

The device's global settings can be adjusted to optimize its operation. Use the following command to apply the desired changes.

AT+GTCFG=gv50,gv50,,1,0,,,3F,2,,1F2F,1,1,1,120,2,1,1,1,1F,0,FFFF$

8. Enable Tow Alarm

Activating the tow alarm is essential for vehicle security. Use the command below to enable this function.

AT+GTTOW=gv50,1,5,1,60,0,0,0,0,2,3,2,,,,,,,,,FFFF$

9. Request Position

To obtain the current location of the device, use the position request command. This command allows you to know where the device is located.

AT+GTRTO=gv50,1,,0,,,,FFFF$

This command is useful for real-time monitoring.

Special commands

1. Special Commands

There are special commands that can be used for specific functions of the device. Below are some of these commands.

AT+GTRTO=gv50,3,,,,,,FFFF$

AT+GTHMC=gv50,1,00000:00:00,,,,,,,,,FFFF$

AT+GTRTO=gv50,D,,,,,,FFFF$

AT+GTRTO=gv50,0,,0,,,,FFFF$

AT+GTRTO=gv50,7,,0,,,,FFFF$

AT+GTJDC=gv50,2,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTJDC=gv50,0,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTOUT=gv50,1,0,0,0,0,0,,,,0,,,,,,,FFFF$

AT+GTOUT=gv50,0,0,0,0,0,0,,,,0,,,,,,,FFFF$