How to configure the Concox GV500 tracker

Configuring the Concox GV500 tracker is essential to ensure that you can monitor the location in real-time efficiently and accurately. In this guide, we will cover the fundamental steps to configure the main features of the device, including APN configuration, DNS server, and IMEI, as well as conducting tests to ensure everything is working correctly.

Configuring the APN is one of the critical first steps, as it allows the tracker to connect to the mobile data network. Next, configuring the DNS server is vital for the device to communicate with the tracking platform. The IMEI, which is the device's identification number, must also be configured properly to ensure that the tracker is recognized in the system.

After the initial configuration, it is important to conduct tests to verify that the Concox GV500 tracker is sending and receiving information correctly. These tests are essential to ensure that you have an uninterrupted tracking experience.

To enhance your tracking experience, we recommend the Trackar platform, which offers a one-time payment and advanced features to optimize the use of your Concox GV500 device.

SMS Commands

1. Factory Reset

To restore the device to factory settings, use the appropriate command. This can be useful in situations where the tracker is not functioning correctly or needs to be reconfigured.

AT+GTRTO=gv50,4,,,,,,FFFF$

2. Time Zone Configuration

Adjusting the time zone is essential to ensure that location data is recorded correctly. Use the command below to set the desired time zone.

AT+GTTMA=gv50,+,0,0,0,,,,,,FFFF$

3. Carrier APN Configuration

It is essential to configure the APN, username, and password according to the specifications of the carrier used. The information may vary, so check with your provider before proceeding.

AT+GTBSI=gv50,agilis.algar.br,agilis,agilis,,,,,FFFF$

AT+GTBSI=gv50,allcom.br,allcom,allcom,,,,,FFFF$

AT+GTBSI=gv50,datacard.nextel3g.net.br,,,,,,,FFFF$

AT+GTBSI=gv50,datelo.com.br,claro,claro,,,,,FFFF$

AT+GTBSI=gv50,jbgprs.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv50,linksolutions.br,link,link,,,,,FFFF$

AT+GTBSI=gv50,m2data.arqia.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv50,m2data.vivo.com.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv50,smart.m2m.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv50,ss.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv50,tim.br,tim,tim,,,,,FFFF$

AT+GTBSI=gv50,transmeet.br,transmeet,transmeet,,,,,FFFF$

AT+GTBSI=gv50,upchip.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv50,voxter.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv50,voxter.algar.br,nlt,nlt,,,,,FFFF$

4. DNS and Port Configuration

Configuring the DNS server and port is crucial to ensure that the tracker connects correctly to the network. Use the following commands to set the desired servers.

AT+GTSRI=gv50,4,,2,central.trackar.com.br,5004,,,,0,0,0,1,,,FFFF$

5. Sending Interval

Configuring the data sending interval is important to optimize the device's communication. It is possible to adjust both the communication time when the ignition is on and when it is off.

AT+GTFRI=gv50,1,0,,0,0000,0000,,60,200,1000,,20,3300,,,,,FFFF$

6. External Battery Configuration

To ensure the proper functioning of the tracker, it is necessary to configure the external battery. Use the command below to set the appropriate parameters.

AT+GTEPS=gv50,2,1000,28000,2,3,0,0,0,0,1,30,30,,FFFF$

7. Global Settings

Adjusting the global settings of the device is essential for its correct operation. Use the command below to set the desired preferences.

AT+GTCFG=gv50,gv50,,1,0,,,3F,2,,1F2F,1,1,1,120,2,1,1,1,1F,0,FFFF$

8. Enable Tow Alarm

Activating the tow alarm can increase the vehicle's security. Use the command below to enable this function.

AT+GTTOW=gv50,1,5,1,60,0,0,0,0,2,3,2,,,,,,,,,FFFF$

9. Request Position

To obtain the current location of the device, use the position request command. This is useful for real-time monitoring.

AT+GTRTO=gv50,1,,0,,,,FFFF$

Special commands

1. Special Commands

In addition to standard settings, there are special commands that can be used for specific functions of the device.

AT+GTRTO=gv50,3,,,,,,FFFF$

AT+GTHMC=gv50,1,00000:00:00,,,,,,,,,FFFF$

AT+GTRTO=gv50,D,,,,,,FFFF$

AT+GTRTO=gv50,0,,0,,,,FFFF$

AT+GTRTO=gv50,7,,0,,,,FFFF$

AT+GTJDC=gv50,2,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTJDC=gv50,0,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTOUT=gv50,1,0,0,0,0,0,,,,0,,,,,,,FFFF$

AT+GTOUT=gv50,0,0,0,0,0,0,,,,0,,,,,,,FFFF$