How to configure Concox G19H tracker

Configuring the Concox G19H tracker is a fundamental step to ensure that you can effectively track the location of your assets. This device is designed to offer high precision and reliability, and proper configuration is essential to maximize its performance. In this guide, we will cover the main aspects of configuration, including setting the APN, configuring the DNS server, entering the IMEI, and conducting tests to ensure everything is working as expected.

Configuring the APN is crucial, as it is through it that the tracker connects to the data network. Additionally, configuring the DNS server ensures that the device can communicate with the servers correctly. The IMEI, in turn, is a unique identifier that allows for the identification of your tracker on the network.

After configuration, it is important to conduct tests to verify that the tracker is sending information correctly. Tracking location in real-time is one of the main functionalities of the Concox G19H, and ensuring that all configuration steps are followed correctly is vital for successful monitoring.

For an even more complete experience, consider using the Trackar platform, which offers a one-time payment and advanced features to facilitate the management of your tracking information.

SMS Commands

1. Time Zone Configuration

It is essential to start the tracker configuration by adjusting the time zone. This ensures that location information is accurate and corresponds to the vehicle's locality.

GMT,W,0,0#

2. Update Time Configuration

The update time is an important parameter that defines the frequency with which the tracker will send location information. You can adjust the sending intervals while the vehicle is in motion or stopped.

TIMER,20,20#

3. Angle Update

This configuration allows the tracker to update its position based on a specific angle. This can be useful for accurately monitoring changes in direction.

ANGLEREP,ON,30,2#

4. Heartbeat Configuration

The heartbeat is a signal sent periodically to indicate that the tracker is active. You can adjust the sending interval based on the vehicle's ignition status.

HB,1,55#

5. DNS and Port Configuration

It is necessary to configure the server details to ensure that the tracker connects correctly to the monitoring platform. Server information must be entered accurately.

SERVER,1,central.trackar.com.br,5023,0#

6. Carrier APN Configuration

APN settings are essential to ensure that the tracker can connect to the internet. Make sure to enter the correct information according to the chip carrier used.

APN,AGILIS.ALGAR.BR#

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,CLARO.COM.BR#

APN,DATATEM.ALGAR.BR#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,OKTOR.BR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR#

APN.BRT.BR#

APN.META.VIVO.COM.BR#

7. Force Position Sending

If necessary, you can force the tracker to send its position for a period of 5 minutes. This can be useful for real-time monitoring.

LJDW#

Special commands

8. Special Commands

Here are some special commands that can be used for additional queries and configurations of the tracker.

PARAM#

GPRSSET#

STATUS#

STA_SENDGPS,1#

STA_SENDGPS,0#

STA_SENDGPS#

SENDS,0#

SOS,A,XXXXXXXXXXX#

CENTER,A,XXXXXXXXXXX#

CENTER,D#

SOS,D,XXXXXXXXXXX#

RELAY,1#

RELAY,0#

ANGLEREP,ON,30,2#

ICCID#

HBT,1,55#

DW#

WHERE#

RESET#

FACTORY#

Remember that some commands may consume more vehicle battery.