How to configure the Concox EV02 tracker

The Concox EV02 tracker is an advanced solution for vehicle monitoring, providing security and real-time tracking. To ensure that the device works correctly, it is essential to configure it properly. The first step is to define the APN (Access Point Name), which allows the tracker to connect to the mobile network. Next, configuring the DNS server is crucial to ensure efficient communication with the tracking servers.

Another important point is the insertion of the IMEI (International Mobile Equipment Identity), which uniquely identifies your device on the network. Performing tests after each configuration is fundamental to verify that everything is working as expected. With these steps, you will be ready to enjoy all the features that the Concox EV02 has to offer.

For an even more complete tracking experience, consider using the Trackar platform, which offers a one-time payment and comprehensive features to effectively manage your devices.

SMS Commands

1. Time Zone Configuration

To ensure the tracker functions correctly, it is essential to set the time zone. The command must be sent to adjust the device's time to GMT.

GMT,W,0,0#

2. Update Interval Adjustment

The update interval can be set in seconds. The first value (X) determines the transmission interval while the vehicle is in motion, and the second (Y) while it is stationary. This adjustment is crucial for optimizing data usage and tracker efficiency.

TIMER,20,20#

3. Angle-Based Update

The tracker can be configured to update its location based on a specific angle. For example, by setting an angle of 30 degrees and a detection time of 2 seconds, the tracker will update its position whenever these parameters are met.

ANGLEREP,ON,30,2#

4. Heartbeat Configuration

The heartbeat is a feature that allows adjustment of the tracker’s transmission interval. The first value indicates the time in minutes with the ignition on, and the second, the time with the ignition off. This helps save battery when the vehicle is not in use.

HB,1,55#

5. Server and DNS Configuration

For the tracker to function correctly, it is necessary to configure the server and port. The command should include the information of the server being used for tracking.

SERVER,1,central.trackar.com.br,5023,0#

6. Carrier APN Configuration

Configuring the APN is essential for the tracker to connect to the carrier's network. It is important to enter the correct APN, username, and password information, as they vary according to the chip provider and the carrier used.

APN,AGILIS.ALGAR.BR#

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,CLARO.COM.BR#

APN,DATATEM.ALGAR.BR#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,OKTOR.BR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR#

APN.BRT.BR#

APN.META.VIVO.COM.BR#

7. Force Position Sending

If you need an immediate sending of positions, it is possible to force the device to send data for a period of 5 minutes. This command can be useful in emergency situations or when you want more frequent tracking temporarily.

LJDW#

Special commands

Special Commands

Special commands allow access to various functionalities of the tracker, such as querying settings, status, and manipulating the satellite receiver.

PARAM#

GPRSSET#

STATUS#

STA_SENDGPS,1#

STA_SENDGPS,0#

STA_SENDGPS#

SENDS,0#

SOS,A,XXXXXXXXXXX#

CENTER,A,XXXXXXXXXXX#

CENTER,D#

SOS,D,XXXXXXXXXXX#

RELAY,1#

RELAY,0#

ANGLEREP,ON,30,2#

ICCID#

HBT,1,55#

DW#

WHERE#

RESET#

FACTORY#

Attention: Some commands may consume more battery of the vehicle.