How to configure Coban TK915 tracker

Configuring the Coban TK915 tracker is an essential step to ensure the effective operation of your device. This model is widely used for vehicle monitoring and has advanced features that facilitate real-time tracking. To get started, you will need to set the APN settings, DNS server, and enter the device's IMEI. These settings are crucial for communication between the tracker and the tracking platform, allowing you to receive accurate and timely information.

Once these settings are adjusted, it is important to perform tests to verify that the tracker is functioning correctly. The tests will ensure that all information is being sent properly and that the device is fully operational. The Coban TK915 is designed to be intuitive, but correct configuration is fundamental to maximizing its potential.

If you are looking for an efficient platform to manage your tracker data, consider Trackar, which offers a one-time payment solution, no monthly fees, ideal for those seeking simplicity and efficiency.

SMS Commands

1. Equipment Setup Start

To start using the tracker, it is necessary to begin the device configuration. This will ensure that the equipment is ready for use and that all functions are enabled.

begin123456

2. Time Zone Configuration

Adjusting the time zone is essential for the tracker to correctly record the local time. Use the appropriate command to set the desired time zone.

time zone123456 0

3. Carrier APN Configuration

Configuring the APN is crucial for the tracker's connectivity. The APN information, username, and password must be updated correctly, as they vary according to the chip supplier and the carrier used.

apn123456 allcom.br

apn123456 linksolutions.br

apn123456 m2data.arqia.br

apn123456 smart.m2m.vivo.com.br

apn123456 tim.br

apn123456 transmeet.br

apn123456 virtueyes.com.br

apn123456 zap.vivo.com.br

4. DNS and Port Configuration

It is important to configure the DNS servers to ensure stable and efficient communication. Enter the server data as needed.

Server 01, Server 02, Server 03: details to be filled in.

5. Vibration Alarm Activation

The vibration alarm is a useful function to alert about unauthorized movements. Activate it to ensure additional security for your tracker.

shock123456

6. Activate Tracking

For the tracker to function correctly, it is necessary to activate the tracking function. This will allow you to monitor the device's location in real-time.

tracker123456

7. GPRS Transmission Activation

GPRS transmission is essential for the operation of the tracker. Make sure to activate it so that the device can send location data.

gprs123456

8. Transmission Time Setting

You can adjust the data transmission interval. The default time is 60 seconds when the equipment is in motion. Adjust as necessary.

upload123456 060

Adjustable time

9. Power Saving Mode

The tracker can enter power-saving mode after 5 minutes of inactivity. It will be reactivated with any movement or vibration.

sleep123456 shock

Wake-up mode: Movement, SMS or CALL.

Special commands

Special Commands

Here are some special commands that can be used for additional functionalities of the tracker.

G123456#

where

gprs123456 0

sensitivity123456 + selecionar número 1, 2 ou 3!

check123456

speed123456 080

nospeed123456

shock123456

noshock123456

lowbatsms123456 on

sleep123456 time

sleep123456 shock

sleep123456 off

imei123456

reset123456