How to configure Coban TK909 tracker

The Coban TK909 tracker is an effective solution for monitoring vehicles and objects, ensuring security and real-time control. To make the most of the functionalities of this device, it is essential to perform the correct configuration. In this guide, we will cover the initial configuration steps, including the insertion of the APN, the definition of the DNS server, and the verification of the device's IMEI. Additionally, we will discuss the importance of conducting tests to ensure that all settings are functioning as expected.

Proper configuration of the Coban TK909 not only optimizes the performance of the tracker but also ensures that you have access to accurate and real-time information about the location of your property. With a simple and straightforward process, you will be able to connect the device to your preferred tracking platform, such as Trackar, which offers a one-time payment and a user-friendly interface for data management. Get ready to enhance the security of your assets with the Coban TK909!

SMS Commands

1. Start of Configuration

To start using the tracker, it is necessary to perform the initial configuration of the device. This step is crucial to ensure that all functionalities operate correctly.

begin123456

2. Time Zone Configuration

It is essential to adjust the time zone of the tracker so that location information is accurate. The following command must be sent to configure the desired time zone.

time zone123456 0

3. APN Configuration

Configuring the APN is essential for the tracker to connect to the carrier's network. The APN, username, and password information varies according to the chip provider used. Make sure to enter the correct data.

apn123456 allcom.br

apn123456 linksolutions.br

apn123456 m2data.arqia.br

apn123456 smart.m2m.vivo.com.br

apn123456 tim.br

apn123456 transmeet.br

apn123456 virtueyes.com.br

apn123456 zap.vivo.com.br

4. DNS and Port Configuration

To ensure efficient communication, it is necessary to configure the DNS servers and ports. These parameters must be defined according to your service provider's specifications.

Server 01: Server 02: Server 03:

5. Vibration Alarm Activation

The vibration alarm can be activated to alert you about unexpected movements of the device. Use the command below to enable this function.

shock123456

6. Tracking Activation

To start tracking the device, it is necessary to activate this function using the appropriate command. This will allow you to monitor the location of the tracker in real-time.

tracker123456

7. GPRS Transmission Activation

The communication of the tracker with the server is done via GPRS. To ensure that this functionality is active, send the indicated command.

gprs123456

8. Transmission Time Definition

The transmission time can be adjusted as needed. The default is 60 seconds while the equipment is in motion. Use the command below to set the desired interval.

upload123456 060

9. Sensor Sleep Mode

The tracker can enter sleep mode after 5 minutes of inactivity. It will be activated again upon detecting any movement, vibration, or receiving an SMS or call. This function helps to save battery.

sleep123456 shock

Special commands

Special Commands

There are additional commands that can be used for various functions of the tracker. Check the list below:

G123456#

where

gprs123456 0

sensitivity123456 + selecionar número 1, 2 ou 3!

check123456

speed123456 080

nospeed123456

shock123456

noshock123456

lowbatsms123456 on

sleep123456 time

sleep123456 shock

sleep123456 off

imei123456

reset123456