How to configure the Coban LK310 tracker

Configuring the Coban LK310 tracker is essential to ensure that you have full control over the location and monitoring of vehicles or objects. The configuration involves entering crucial information such as APN, DNS server, and IMEI, which are fundamental for the proper functioning of the device. By following this guide, you will learn how to perform connection tests and optimize the performance of your tracker.

Configuring the APN is one of the most important steps, as it allows the tracker to connect to the mobile network. Next, the DNS server needs to be configured to ensure that data is transmitted correctly. The IMEI, which is the identification number of your device, must also be entered to authenticate communication with the tracking platform.

After making these configurations, it is recommended to conduct tests to verify that the tracker is functioning as expected. This way, you can ensure that the Coban LK310 is ready to provide accurate and real-time information.

For efficient and real-time monitoring, consider the Trackar platform, which offers a one-time payment and an optimized experience for tracking your assets. Don't miss the opportunity to ensure the safety of what is important to you!

SMS Commands

1. Start Configuration

To begin the tracker configuration, send the initialization command. This will ensure that the device is ready to receive the next instructions.

begin123456

2. Set Time Zone

Adjust the device's time zone to ensure that location data is accurate. This setting is crucial for the proper functioning of the tracker.

time zone123456 0

3. Set Carrier APN

It is essential to configure the APN correctly, as this information varies by carrier. Make sure to use the correct data to ensure connectivity.

apn,m2track.br,vivo,vivo#

apn123456 allcom.br

apn123456 allcom.vivo.com.br

apn123456 brt.br

apn123456 claro.com.br

apn123456 datatem.algar.br

apn123456 eseye.com

apn123456 gprs.amazoniacelular.com.br

apn123456 gprs.oi.com.br

apn123456 gprs.telemigcelular.com.br

apn123456 linksolutions.br

apn123456 m2data.algar.br

apn123456 m2data.arqia.br

apn123456 m2data.vivo.com.br

apn123456 m2m.vodafone.br

apn123456 m2mprepgago.br arqia arqia

apn123456 meta.vivo.com.br meta meta

apn123456 oktor.br

apn123456 sercomtel.com.br

apn123456 smart.m2m.vivo.com.br

apn123456 ss.algar.br

apn123456 tim.br

apn123456 tmdata.tim.br

apn123456 transmeet.br

apn123456 virtueyes.vivo.com.br

apn123456 voxter.algar.br

apn123456 voxter.br

apn123456 wap.ctbc.com.br

apn123456 wl.vivo.com.br

apn123456 y1.m2m.algar.com.br

apn123456 zap.vivo.com.br

Check with your carrier for the correct APN data.

4. Set DNS and Port

Define the DNS servers and the port that the device will use to connect to the network. This configuration is essential for the correct communication of the tracker.

SZCS,123456,DOMAIN=central.trackar.com.br:6013

5. Enable GPRS Transmission

Activate data transmission via GPRS. This will allow the tracker to send location and status information to the server.

gprs123456

6. Activate Tracking Mode

Put the device in tracking mode so that it starts monitoring the location in real-time.

tracker123456

7. Set Transmission Time

Define the time interval at which the tracker will send location data. This command adjusts the transmission time to 60 seconds.

upload123456 60

8. Activate Vibration Alarm

Enable the vibration alarm. This feature will alert the user in case of unexpected movements of the device.

shock123456

9. Set Sleep Mode by Sensor

The tracker will enter hibernation mode after 5 minutes of inactivity. It will be activated by any detected movement or vibration.

sleep123456 shock

Special commands

Special Commands

These additional commands allow quick access to information and change the device's operation modes.

G123456

where

check123456

(s42,1234)

status

Param1

Param2

sos

sleep123456 10

sleep123456 shock

nosleep12345

shock123456

noshock123456

pwr1

pwr0

555

666

imei123456

rst

format