How to configure the Coban LK208 tracker

The Coban LK208 tracker is a robust solution for vehicle monitoring, offering advanced features to ensure the safety of your vehicle. In this guide, we will cover the necessary steps to configure the device, including setting up the APN, DNS server, and IMEI, as well as conducting tests to ensure everything is working correctly.

Configuring the APN is crucial, as it ensures that the tracker can connect to the data network to transmit location information. The DNS server also plays a fundamental role in enabling communication between the device and the tracking platform. Additionally, the IMEI is a unique identifier that must be correctly configured to avoid conflicts and ensure data integrity.

After configuration, it is essential to conduct tests to validate that the Coban LK208 is operating as expected. This includes checking the accuracy of the location and communication with the tracking platform.

For a complete monitoring experience, consider integrating your tracker with the Trackar platform, which offers a one-time payment solution and an intuitive interface to efficiently manage your tracking information.

SMS Commands

1. Start Equipment Setup

To begin, it is necessary to initialize the GPS tracker. This is done by sending a specific command that activates the device's settings.

begin123456

2. Set Time Zone

The next step is to adjust the time zone of the tracker. This ensures that the location information is correct in relation to the local time.

time zone123456 0

3. Configure Carrier APN

Configuring the APN is crucial and must be done with the correct information provided by the carrier. Each SIM card may have a different APN, so check the data before proceeding.

apn,m2track.br,vivo,vivo#

apn123456 allcom.br

apn123456 allcom.vivo.com.br

apn123456 brt.br

apn123456 claro.com.br

apn123456 datatem.algar.br

apn123456 eseye.com

apn123456 gprs.amazoniacelular.com.br

apn123456 gprs.oi.com.br

apn123456 gprs.telemigcelular.com.br

apn123456 linksolutions.br

apn123456 m2data.algar.br

apn123456 m2data.arqia.br

apn123456 m2data.vivo.com.br

apn123456 m2m.vodafone.br

apn123456 m2mprepgago.br arqia arqia

apn123456 meta.vivo.com.br meta meta

apn123456 oktor.br

apn123456 sercomtel.com.br

apn123456 smart.m2m.vivo.com.br

apn123456 ss.algar.br

apn123456 tim.br

apn123456 tmdata.tim.br

apn123456 transmeet.br

apn123456 virtueyes.vivo.com.br

apn123456 voxter.algar.br

apn123456 voxter.br

apn123456 wap.ctbc.com.br

apn123456 wl.vivo.com.br

apn123456 y1.m2m.algar.com.br

apn123456 zap.vivo.com.br

Remember that APN information may vary depending on the carrier.

4. Configure DNS and Port

It is necessary to configure the DNS servers and the port that the tracker will use to communicate with the tracking servers.

SZCS,123456,DOMAIN=central.trackar.com.br:6013

5. Enable GPRS Transmission

Activate data transmission via GPRS so that the tracker can send location and status information.

gprs123456

6. Tracking Mode

Activate tracking mode so that the device starts sending location data.

tracker123456

7. Set Transmission Interval

Define the time interval at which the tracker will send data. The default is 60 seconds, but it can be adjusted as needed.

upload123456 60

8. Activate Vibration Alarm

Enable the vibration alarm so that the tracker can detect any impact or unexpected movement.

shock123456

9. Sleep Mode by Sensor

Set the tracker to enter hibernation mode after 5 minutes of inactivity. It will be activated again with any movement or vibration.

sleep123456 shock

This mode helps save battery.

Special commands

10. Special Commands

Here are some special commands that allow access to additional information or change specific settings.

G123456

where

check123456

(s42,1234)

status

Param1

Param2

sos

sleep123456 10

sleep123456 shock

nosleep12345

shock123456

noshock123456

pwr1

pwr0

555

666

imei123456

rst

format