How to configure the Coban LK206 tracker

The Coban LK206 tracker is an efficient solution for vehicle monitoring, offering advanced features to ensure the safety and control of your fleet. In this guide, we will cover the essential steps to configure your device, including APN configuration, DNS server, IMEI, and conducting tests to ensure everything is working correctly.

Configuring the APN is crucial for the tracker to connect to the mobile data network, allowing real-time information transmission. Additionally, configuring the DNS server ensures that the device can resolve network addresses, facilitating communication with the tracking platform. The IMEI, which is the identification number of your tracker, also needs to be verified and configured correctly.

Conducting tests is fundamental to confirm that the Coban LK206 tracker is operating as expected, allowing you to monitor the location of your vehicle accurately.

For an even more complete and hassle-free experience, consider using the Trackar platform, which offers a one-time payment service for simple and efficient vehicle management and monitoring.

SMS Commands

1. Start Equipment Setup

To begin the GPS tracker setup, it is necessary to send the initial command. This will allow you to access all the device's features.

begin123456

2. Set Time Zone

It is essential to adjust the time zone of the tracker to ensure that location data is recorded correctly. Use the appropriate command to set your time zone.

time zone123456 0

3. Configure Carrier APN

Configuring the APN is crucial for the tracker to connect to the carrier's network. The APN, username, and password information must be updated according to the chip provider. Check the list of available APN commands.

apn,m2track.br,vivo,vivo#

apn123456 allcom.br

apn123456 allcom.vivo.com.br

apn123456 brt.br

apn123456 claro.com.br

apn123456 datatem.algar.br

apn123456 eseye.com

apn123456 gprs.amazoniacelular.com.br

apn123456 gprs.oi.com.br

apn123456 gprs.telemigcelular.com.br

apn123456 linksolutions.br

apn123456 m2data.algar.br

apn123456 m2data.arqia.br

apn123456 m2data.vivo.com.br

apn123456 m2m.vodafone.br

apn123456 m2mprepgago.br arqia arqia

apn123456 meta.vivo.com.br meta meta

apn123456 oktor.br

apn123456 sercomtel.com.br

apn123456 smart.m2m.vivo.com.br

apn123456 ss.algar.br

apn123456 tim.br

apn123456 tmdata.tim.br

apn123456 transmeet.br

apn123456 virtueyes.vivo.com.br

apn123456 voxter.algar.br

apn123456 voxter.br

apn123456 wap.ctbc.com.br

apn123456 wl.vivo.com.br

apn123456 y1.m2m.algar.com.br

apn123456 zap.vivo.com.br

4. Configure DNS and Port

To ensure that the tracker connects correctly to the server, it is necessary to configure the DNS and port. Use the provided commands to set the servers.

SZCS,123456,DOMAIN=central.trackar.com.br:6013

5. Enable GPRS Transmission

It is essential to enable GPRS transmission so that the tracker can send real-time location data. Send the indicated command to activate this function.

gprs123456

6. Activate Tracking Mode

To start monitoring the location, it is necessary to activate tracking mode. Use the corresponding command to initiate this mode.

tracker123456

7. Configure Tracking Mode

Set the time interval for data transmission. The default value is 60 seconds, but it can be adjusted as needed. Send the command to configure the desired time.

upload123456 60

8. Activate Vibration Alarm

The vibration alarm can be activated to alert about unexpected movements. Use the appropriate command to enable this function.

shock123456

9. Configure Sleep Mode by Sensor

This mode allows the tracker to enter hibernation mode after 5 minutes of inactivity. It can be activated by movement, SMS, or call. Send the command to configure this function.

sleep123456 shock

The tracker will wake up with any vibration or movement.

Special commands

Special Commands

Here are some special commands that can be used for additional functionalities of the tracker.

G123456

where

check123456

(s42,1234)

status

Param1

Param2

sos

sleep123456 10

sleep123456 shock

nosleep12345

shock123456

noshock123456

pwr1

pwr0

555

666

imei123456

rst

format