How to configure Coban LK110 tracker

Configuring the Coban LK110 tracker is essential to ensure the proper functioning of the device and the effectiveness of monitoring. This model of tracker is widely used due to its accuracy and reliability. To start, you will need to configure the APN, which is essential for connecting to the mobile data network, as well as defining the DNS server, which allows for correct communication with the tracking servers.

Another important point is the IMEI, which serves as the unique identification of your device. Make sure you are using the correct IMEI to avoid connection issues. After making these configurations, it is recommended to conduct tests to verify that the tracker is functioning correctly and sending information in real-time.

Remember that proper configuration not only optimizes the performance of the Coban LK110 but also ensures that you have access to accurate and up-to-date data about the location of your vehicle or object of interest. To further facilitate your monitoring, consider using the Trackar platform, which offers a one-time payment and an efficient and intuitive tracking experience. Configure your device and start monitoring with confidence!

SMS Commands

1. Start of Configuration

To begin the configuration of the LK110 tracker, use the specific command that allows you to start the configuration process. It is important to follow the subsequent steps to ensure that the device functions correctly.

begin123456

2. Time Zone Configuration

Adjust the device's time zone so that it correctly records time information. Use the corresponding command to set the desired time zone.

time zone123456 0

3. Carrier APN Configuration

It is essential to enter the correct APN, username, and password information, which may vary depending on the chip's carrier. Check the list below and use the appropriate command for your carrier.

apn,m2track.br,vivo,vivo#

apn123456 allcom.br

apn123456 allcom.vivo.com.br

apn123456 brt.br

apn123456 claro.com.br

apn123456 datatem.algar.br

apn123456 eseye.com

apn123456 gprs.amazoniacelular.com.br

apn123456 gprs.oi.com.br

apn123456 gprs.telemigcelular.com.br

apn123456 linksolutions.br

apn123456 m2data.algar.br

apn123456 m2data.arqia.br

apn123456 m2data.vivo.com.br

apn123456 m2m.vodafone.br

apn123456 m2mprepgago.br arqia arqia

apn123456 meta.vivo.com.br meta meta

apn123456 oktor.br

apn123456 sercomtel.com.br

apn123456 smart.m2m.vivo.com.br

apn123456 ss.algar.br

apn123456 tim.br

apn123456 tmdata.tim.br

apn123456 transmeet.br

apn123456 virtueyes.vivo.com.br

apn123456 voxter.algar.br

apn123456 voxter.br

apn123456 wap.ctbc.com.br

apn123456 wl.vivo.com.br

apn123456 y1.m2m.algar.com.br

apn123456 zap.vivo.com.br

Check your carrier's information to ensure the connection.

4. DNS and Port Configuration

Set the DNS servers and the port for the tracker communication. Use the specific command for each server, ensuring that all information is correct.

SZCS,123456,DOMAIN=central.trackar.com.br:6013

5. Enable GPRS Transmission

Activate data transmission via GPRS so that the tracker can send real-time information. Use the corresponding command to enable this function.

gprs123456

6. Tracking Mode

Activate the device's tracking mode, allowing it to start monitoring the location. Use the appropriate command for this configuration.

tracker123456

7. Transmission Time Configuration

Set the time interval for data transmission. The time can be adjusted in seconds, and the following command configures the tracker to transmit every 60 seconds.

upload123456 60

8. Vibration Alarm

Activate the vibration alarm so that the tracker can detect impacts and notify you. Use the corresponding command to enable this function.

shock123456

9. Sensor Sleep Mode

Configure the tracker’s sleep mode, which will be activated after 5 minutes of inactivity. The device will be activated again by movement, SMS, or call.

sleep123456 shock

Special commands

Special Commands

Here are some special commands that can be used for additional functionalities of the tracker.

G123456

where

check123456

(s42,1234)

status

Param1

Param2

sos

sleep123456 10

sleep123456 shock

nosleep12345

shock123456

noshock123456

pwr1

pwr0

555

666

imei123456

rst

format