How to configure the Coban GPS102 tracker

The Coban GPS102 tracker is an effective solution for monitoring vehicles and people, offering advanced features that allow for real-time location tracking. To ensure that your device operates optimally, it is essential to perform the initial setup correctly. In this guide, we will cover the essential steps to configure your Coban GPS102, including APN adjustments, DNS server configuration, and IMEI verification.

Configuring the APN is one of the first steps, as it ensures that the tracker connects to the data network correctly. Next, defining the DNS server is crucial to ensure that the device can communicate with the tracking servers. Additionally, verifying the IMEI is important to identify your device on the network and ensure that it is active. Finally, we will conduct some tests to confirm that all configurations are working as expected.

By following this guide, you will be on the right path to maximizing the efficiency of your Coban GPS102 tracker. If you are looking for a robust and easy-to-use platform to manage your tracking, consider Trackar, which offers a one-time payment and advanced features to optimize your monitoring experience.

SMS Commands

1. Start GPS Configuration

To begin using the GPS tracker, it is necessary to initiate the device configuration process. This is essential to ensure that all functions operate correctly.

begin123456

2. Time Zone Configuration

Adjust the device's time zone so that location data is recorded correctly according to your region.

time zone123456 0

3. Configure Carrier APN

It is crucial to enter the correct APN settings, including username and password, as this information varies according to the chip provider and carrier. Check the available options below.

apn123456 allcom.br

apn123456 linksolutions.br

apn123456 m2data.arqia.br

apn123456 smart.m2m.vivo.com.br

apn123456 tim.br

apn123456 transmeet.br

apn123456 virtueyes.com.br

apn123456 zap.vivo.com.br

4. DNS and Port Configuration

In this step, you must configure the DNS servers and the necessary ports for the tracker communication. Make sure to enter the correct data.

Server 01, Server 02, Server 03: information to be entered.

5. Activate Vibration Alarm

This function allows the tracker to detect vibrations and activate an alarm if they occur. It is a useful security measure.

shock123456

6. Activate Tracking

For the tracker to start sending location information, it is necessary to activate the tracking function.

tracker123456

7. Enable GPRS Transmission

Enable data transmission via GPRS so that the tracker can send real-time location information.

gprs123456

8. Set Transmission Time

You can adjust the time interval between the tracker transmissions. The default is 60 seconds while the device is in motion.

upload123456 060

9. Sleep Mode by Sensor

The tracker will enter hibernation mode after 5 minutes without movement. Any vibration or movement will reactivate it. You can wake it up by movement, SMS, or call.

sleep123456 shock

Special commands

Special Commands

Here are some special commands that may be useful for managing your tracker.

G123456#

where

gprs123456 0

sensitivity123456 + selecionar número 1, 2 ou 3!

check123456

speed123456 080

nospeed123456

shock123456

noshock123456

lowbatsms123456 on

sleep123456 time

sleep123456 shock

sleep123456 off

imei123456

reset123456