How to configure Coban Coban GPS306 tracker

Configuring the Coban GPS306 tracker is a fundamental step to ensure the proper functioning of your tracking device. This model is widely used due to its efficiency and reliability, and the configuration process involves several essential steps, such as setting up the APN, DNS server, and IMEI.

First, it is important to enter the correct APN information, which is necessary for the device to connect to the mobile data network. Next, the DNS server must be configured to allow communication between the tracker and the monitoring platform. Additionally, it is crucial to verify the device's IMEI, as it serves as a unique identifier, ensuring that the tracker is linked to your user account.

After completing these configurations, it is recommended to conduct tests to confirm that the tracker is sending information correctly to the chosen platform. These tests are essential to ensure that all functionalities of the Coban GPS306 are operating as expected.

For even more efficient management of your tracker, consider using the Trackar platform, which offers a one-time payment and various features to optimize your tracking experience.

SMS Commands

1. Start Equipment Configuration

To begin using the tracker, it is necessary to perform the initial configuration of the device. This step is crucial to ensure that the equipment functions correctly and is ready for tracking.

begin123456

2. Set Time Zone

Adjusting the time zone is essential for location data to be recorded correctly. Use the appropriate command to set your time zone.

time zone123456 0

3. Configure Carrier APN

Configuring the APN is essential for the tracker to connect to the internet. The APN, username, and password information must be adjusted according to the carrier of the SIM card used. Below are the commands for different carriers.

apn123456 allcom.br

apn123456 linksolutions.br

apn123456 m2data.arqia.br

apn123456 smart.m2m.vivo.com.br

apn123456 tim.br

apn123456 transmeet.br

apn123456 virtueyes.com.br

apn123456 zap.vivo.com.br

Make sure to use the correct information for your carrier.

4. Configure DNS and Ports

It is important to configure the DNS servers to ensure a stable and effective connection. The details of the servers should be entered as necessary.

Server 01, Server 02, and Server 03 must be defined.

5. Activate Vibration Alarm

The vibration alarm is a feature that allows for the detection of unexpected movements. Activate it to enhance the security of your tracker.

shock123456

6. Activate Tracking

For the tracker to start sending location information, it is necessary to activate the tracking function. This will allow monitoring of the device in real time.

tracker123456

7. Activate GPRS Transmission

Activating GPRS transmission is essential for data to be sent correctly. Execute the command to ensure that the tracker connects to the network.

gprs123456

8. Set Transmission Time

Adjust the data transmission time according to your needs. The default time is 60 seconds while the equipment is in motion.

upload123456 060

9. Sleep Mode by Sensor

This mode allows the tracker to enter hibernation after 5 minutes of inactivity. Any movement will cause the device to return to active mode.

sleep123456 shock

The tracker can be activated by movement, SMS, or call.

Special commands

Special Commands

Here are some additional commands that can be used for specific functionalities of the tracker.

G123456#

where

gprs123456 0

sensitivity123456

check123456

speed123456 080

nospeed123456

shock123456

noshock123456

lowbatsms123456 on

sleep123456 time

sleep123456 shock

sleep123456 off

imei123456

reset123456