How to configure the Coban Coban GPS302 tracker
How to configure the Coban GPS302 tracker
Configuring the Coban GPS302 tracker is an essential step to ensure that you can effectively monitor and track your properties or vehicles. This device is widely recognized for its accuracy and reliability, making it a popular choice among users seeking security and control. To get started, it is important to properly configure the APN, DNS server, and IMEI information, which are fundamental for the optimized functioning of the tracker.
Correctly configuring these parameters allows the device to connect to the data network and send real-time location information. After the initial setup, it is recommended to conduct tests to verify that the tracker is sending data correctly, ensuring that all functionalities are operational.
In this guide, you will learn step-by-step how to perform these configurations simply and effectively. It is important to follow the instructions carefully to avoid any communication issues with the device. Don't forget that by using the Trackar platform, you will have access to an intuitive and efficient tracking system, with a one-time payment, that enhances all the functionalities of your Coban GPS302. Get ready for an unparalleled tracking experience!
SMS Commands
1. Device Configuration Start
To start the configuration of the Coban GPS302 tracker, use the start command. This is essential to ensure that the device is ready to receive the next instructions.
begin123456
2. Time Zone Configuration
Adjust the time zone of your tracker to ensure that location information is accurate. Use the appropriate command followed by the desired time zone value.
time zone123456 0
3. Carrier APN Configuration
It is crucial to update the APN, username, and password information according to the carrier of the chip used. Settings may vary, so make sure to enter the correct data.
apn123456 allcom.br
apn123456 linksolutions.br
apn123456 m2data.arqia.br
apn123456 smart.m2m.vivo.com.br
apn123456 tim.br
apn123456 transmeet.br
apn123456 virtueyes.com.br
apn123456 zap.vivo.com.br
4. DNS and Port Configuration
Set the necessary DNS servers for the proper functioning of the tracker. It is important to ensure that these values are correct to avoid connectivity issues.
Server 01, Server 02, Server 03: Enter the data as needed.
5. Vibration Alarm Activation
Activate the vibration alarm so that the device can alert you about unwanted movements. This feature is useful for additional security.
shock123456
6. Enable Tracking
Activate the tracking function of your device to monitor its location in real-time. This is one of the main functionalities of the tracker.
tracker123456
7. GPRS Transmission Activation
Enable data transmission via GPRS so that the tracker can send location information to the server.
gprs123456
8. Set Transmission Time
Adjust the transmission time to 60 seconds while the device is in motion. This helps optimize the frequency of location updates.
upload123456 060
9. Sensor Sleep Mode
Configure the tracker to enter hibernation mode after 5 minutes of inactivity. The device will be activated again by any movement, SMS, or call.
sleep123456 shock
Special commands
10. Special Commands
Use the following special commands for additional functionalities of the tracker.
G123456#
where
gprs123456 0
sensitivity123456 + selecionar número 1, 2 ou 3!
check123456
speed123456 080
nospeed123456
shock123456
noshock123456
lowbatsms123456 on
sleep123456 time
sleep123456 shock
sleep123456 off
imei123456
reset123456
Own your tracking platform with a one-time payment