How to configure the Coban Coban GPS301 tracker

Configuring the Coban GPS301 tracker is a fundamental step to ensure the effective operation of your tracking device. This device is widely used for its reliability and accuracy in location tracking, making it ideal for monitoring vehicles and other valuable assets. To start the configuration process, you will need to define essential parameters such as APN, DNS server, and IMEI, as well as conduct tests to ensure everything is working correctly.

The APN (Access Point Name) is crucial for the tracker’s communication with the data network, while the DNS server allows the device to resolve domain names, facilitating the exchange of information. The IMEI (International Mobile Equipment Identity) is a unique number that identifies your tracker on the network. After configuring these parameters, it is essential to conduct tests to confirm that the device is functioning as expected and that the connection to the tracking platform is established.

For even more efficient management of your Coban GPS301, consider integrating with the Trackar platform, which offers a one-time payment system, providing a practical solution without monthly fees. Track your asset with precision and security!

SMS Commands

1. Start device configuration

To begin using the Coban GPS301 tracker, it is necessary to start the device configuration. This is done by sending a specific command that activates the initial settings.

begin123456

2. Set time zone

After starting the configuration, the next step is to adjust the time zone of the tracker. This ensures that the location information is accurate in relation to the local time.

time zone123456 0

3. Configure carrier APN

Configuring the APN is crucial, as each carrier has different information. Make sure to enter the correct data so that the tracker functions properly.

apn123456 allcom.br

apn123456 linksolutions.br

apn123456 m2data.arqia.br

apn123456 smart.m2m.vivo.com.br

apn123456 tim.br

apn123456 transmeet.br

apn123456 virtueyes.com.br

apn123456 zap.vivo.com.br

Check the APN information with your service provider.

4. Set DNS and Port

In this step, you must enter the addresses of the DNS servers and the necessary ports to ensure a stable connection.

Fill in the data as requested.

5. Activate Vibration Alarm

The vibration alarm helps detect suspicious movements. Activate it to ensure that you will be notified in case of any unexpected activity.

shock123456

6. Activate Tracking

To start monitoring the location of the device, it is necessary to activate the tracking function. This will allow you to follow the tracker in real time.

tracker123456

7. Activate GPRS transmission

GPRS transmission must be activated for location data to be sent correctly. This configuration is essential for the functioning of the tracker.

gprs123456

8. Set transmission time

You can adjust the time interval between data transmissions. A time of 60 seconds is recommended while the tracker is in motion.

upload123456 060

9. Sleep Mode by Sensor

The tracker enters power-saving mode after 5 minutes of inactivity. It will be activated again upon detecting any movement or vibration.

sleep123456 shock

Can be activated by movement, SMS, or call.

Special commands

Special Commands

Here are some additional commands that may be useful for managing your tracker.

G123456#

where

gprs123456 0

sensitivity123456 +

check123456

speed123456 080

nospeed123456

shock123456

noshock123456

lowbatsms123456 on

sleep123456 time

sleep123456 shock

sleep123456 off

imei123456

reset123456