How to configure the Coban Coban GPS107 tracker

Configuring the Coban GPS107 tracker is a crucial step to ensure that you make the most of the features of this tracking device. In this guide, we will cover the main aspects of the configuration, including setting the APN, DNS server, IMEI, and conducting tests to verify that everything is working correctly.

The APN (Access Point Name) is essential for the device to connect to the mobile data network, allowing you to receive real-time location information. Additionally, configuring the DNS server ensures that the tracker can communicate efficiently with tracking servers. The IMEI, in turn, is a unique identification number that associates your device with the network.

After defining these parameters, it is essential to conduct tests to ensure that the tracker is sending data correctly and that you can view the information on your tracking platform.

With the proper configuration, the Coban GPS107 will become a powerful tool for monitoring and security. To further enhance your experience, consider using the Trackar platform, which offers a one-time payment and advanced features for managing your tracker. Start now and enjoy all the benefits that technology can offer!

SMS Commands

1. Start Equipment Configuration

To begin using the tracker, it is necessary to start the device configuration. This will ensure that all functions of the tracker are operational and ready for use.

begin123456

2. Set Time Zone

It is important to adjust the time zone of the tracker so that location and event times are recorded correctly. Use the appropriate command to set the desired time zone.

time zone123456 0

3. Set Carrier APN

Configuring the APN is crucial for the operation of the tracker. You must enter the correct APN, username, and password information, which vary according to the carrier of the chip used. Make sure to use the correct data.

apn123456 allcom.br

apn123456 linksolutions.br

apn123456 m2data.arqia.br

apn123456 smart.m2m.vivo.com.br

apn123456 tim.br

apn123456 transmeet.br

apn123456 virtueyes.com.br

apn123456 zap.vivo.com.br

4. Set DNS and Port

Configuring the DNS and ports is essential to ensure proper communication of the tracker with the network. It is necessary to define the DNS servers for the connection to work properly.

Server 01, Server 02, Server 03: set as needed.

5. Activate Vibration Alarm

The vibration alarm is an important feature that alerts about unwanted movements. Activate this function to ensure the safety of your device.

shock123456

6. Activate Tracking

For the tracker to function properly, it is essential to activate the tracking function. This will allow you to monitor the device's location in real-time.

tracker123456

7. Activate GPRS Transmission

GPRS transmission must be activated for the tracker to send location data and other information. This configuration is fundamental for the operation of the device.

gprs123456

8. Set Transmission Time

You can adjust the data transmission interval of the tracker. It is possible to set a time of 60 seconds for the tracker to send information while in motion.

upload123456 060

The transmission time is adjustable according to your needs.

9. Sleep Mode by Sensor

This mode allows the tracker to enter sleep mode after 5 minutes of inactivity. Any movement or vibration will cause the device to return to an active state. This function helps save battery.

sleep123456 shock

The tracker can be awakened by movement, SMS, or call.

Special commands

Special Commands

Here are some special commands that can be used for additional functions of the tracker.

G123456#

where

gprs123456 0

sensitivity123456 + selecionar número 1, 2 ou 3!

check123456

speed123456 080

nospeed123456

shock123456

noshock123456

lowbatsms123456 on

sleep123456 time

sleep123456 shock

sleep123456 off

imei123456

reset123456