How to configure Coban Coban 303F tracker

Configuring the Coban 303F tracker is essential to ensure the proper and efficient functioning of the device. This model is widely used for monitoring vehicles and objects, offering advanced functionalities that allow real-time tracking. To start the configuration, you will need to adjust some essential settings, such as the APN (Access Point Name), which is crucial for connecting the device to the mobile data network. Additionally, configuring the DNS server and verifying the IMEI are crucial steps to ensure that the tracker is properly registered and operating without interruptions.

Functionality tests are an important part of the process, as they ensure that all settings are correct and that the tracker is transmitting data properly. With a clear step-by-step guide and accurate information, you will be able to configure your Coban 303F without complications.

For an even more complete tracking experience, consider using the Trackar platform, which offers a one-time payment solution, ensuring access to advanced monitoring features.

SMS Commands

1. Start Equipment Configuration

To start using the Coban 303F tracker, it is necessary to begin the equipment configuration. Use the appropriate command for this.

begin123456

2. Time Zone Configuration

Adjust the device's time zone to ensure that location data is correct. The command should be sent with the desired configuration.

time zone123456 0

3. Carrier APN Configuration

It is crucial that the APN information, username, and password are updated according to the chip provider used. This information varies by supplier.

apn123456 allcom.br

apn123456 linksolutions.br

apn123456 m2data.arqia.br

apn123456 smart.m2m.vivo.com.br

apn123456 tim.br

apn123456 transmeet.br

apn123456 virtueyes.com.br

apn123456 zap.vivo.com.br

4. DNS and Port Configuration

It is necessary to configure the DNS servers to ensure proper communication of the tracker. Specify the desired servers.

Server 01, Server 02, Server 03: [insert information here]

5. Vibration Alarm

Activate the vibration alarm so that the tracker can alert you in case of unexpected movement.

shock123456

6. Tracking Activation

Enable the tracking function so that the device can send its location in real time.

tracker123456

7. Enable GPRS Transmission

For the tracker to send location data, it is necessary to enable GPRS transmission.

gprs123456

8. Set Transmission Time

Adjust the transmission time to 60 seconds while the equipment is in motion. This will ensure frequent updates.

upload123456 060

The time can be adjusted as needed.

9. Sensor Sleep Mode

The tracker will enter hibernation mode after 5 minutes of inactivity. It will be activated by vibrations, movements, SMS messages, or calls.

sleep123456 shock

Special commands

10. Special Commands

Explore the special commands that can be used for various functions of the tracker.

G123456#

where

gprs123456 0

sensitivity123456 + selecionar número 1, 2 ou 3!

check123456

speed123456 080

nospeed123456

shock123456

noshock123456

lowbatsms123456 on

sleep123456 time

sleep123456 shock

sleep123456 off

imei123456

reset123456