How to configure the CCTR CCTR-810 tracker

In this guide, we will cover the process of configuring the CCTR CCTR-810 tracker, an essential device for vehicle monitoring and tracking. To ensure that the CCTR-810 functions correctly, it is crucial to properly configure parameters such as APN, DNS server, and IMEI. These steps are vital for establishing a stable and efficient connection with the tracking platform.

Configuring the APN is the first step, as it allows the tracker to connect to the mobile data network. Next, defining the DNS server is important so that the device can resolve addresses on the internet, facilitating communication with the tracking server. Finally, it is necessary to verify the device's IMEI, a unique number that identifies the tracker on the network.

After the initial configuration, it is recommended to conduct tests to ensure that all functions of the CCTR-810 are operating correctly. This includes checking data transmission, the accuracy of location information, and the device's response to commands.

To enhance the tracking experience, consider using the Trackar platform, which offers a one-time payment for complete access to all functionalities and detailed reports. Keep your tracker always operational and maximize its efficiency with the proper configurations.

SMS Commands

1. Restore Factory Settings

To return the device to its original factory state, use the appropriate command. This ensures that all custom settings are removed.

FACTORY*123456

2. Time Zone Configuration

Adjust the tracker’s time zone to ensure that recorded times are accurate. This command is essential for operations in different regions.

TIMEZONE*123456*0

3. Configure Carrier APN

APN settings must be adjusted according to the carrier of the SIM card used. It is crucial to enter the correct information to ensure the tracker’s connectivity.

APN*123456*CLARO.BR

APN*123456*CLARO.COM.BR

APN*123456*GPRS.OI.COM.BR

APN*123456*SMART.M2M.VIVO.COM.BR

APN*123456*TIMBRASIL

APN*123456*ZAP.VIVO.COM.BR

USERNAME*123456*CLARO,CLARO

USERNAME*123456*OI,OI

USERNAME*123456*TIMBRASIL,TIMBRASIL

USERNAME*123456*VIVO,VIVO

Remember that APN information varies according to the chip supplier and carrier.

4. Set DNS and Port

Define the DNS servers and communication port to ensure the tracker connects correctly to the monitoring platform.

IP*123456*central.trackar.com.br,5040

5. Tracking Mode

Choose between the available tracking modes. The default mode keeps the device always active, while the shock control mode activates and deactivates the tracker according to movement.

MODE*123456*1

MODE*123456*2

Mode 1 is the default, while mode 2 saves battery by turning off the tracker when not in motion.

6. Set Upload Interval

Adjust the time in seconds for the data upload interval. The minimum interval is 30 seconds and the maximum is 999 seconds.

INTERVAL*123456*60

The factory default is 30 seconds.

Special commands

Special Commands

Use special commands to perform additional functions and maintain control of the tracker.

CHECK*123456

URL*123456

CHECKPHONE*123456

CHECKPASSWORD#

ALARM*123456

RESET*123456

KEEPONLINE*123456

SHOCKCONTROLGPRS*123456