How to configure the CCTR CCTR-800 tracker

Configuring the CCTR CCTR-800 tracker is essential to ensure effective and accurate monitoring of your assets. This advanced device offers a range of functionalities that can be enhanced with the correct configuration. In this guide, we will cover the main steps necessary to configure your tracker, including setting the APN, configuring the DNS server, and entering the IMEI.

Additionally, we will perform essential tests to ensure that all configurations are working perfectly. The configuration process may seem challenging at first, but with the right guidance, you will be able to optimize the use of your CCTR-800 quickly and efficiently.

Remember that the correct APN configuration is crucial for the tracker to connect to the mobile network and transmit data correctly. Below, you will find detailed instructions that will help you carry out each step with confidence.

For an even more complete experience, consider using the Trackar platform, which offers a one-time payment system for managing your trackers. With it, you will have access to additional functionalities that will further enhance the monitoring of your assets.

SMS Commands

1. Restore Factory Settings

To return the device to its original settings, use the appropriate command. This is useful for troubleshooting or resetting the device for new use.

FACTORY*123456

2. Set Time Zone

Adjust the tracker’s time zone to ensure that location information is accurate. Use the indicated command to set the desired time zone.

TIMEZONE*123456*0

3. Configure Carrier APN

It is essential to correctly configure the APN, username, and password, as this information varies depending on the chip provider and carrier. Ensure that the data is correct for effective connectivity.

APN*123456*CLARO.BR

APN*123456*CLARO.COM.BR

APN*123456*GPRS.OI.COM.BR

APN*123456*SMART.M2M.VIVO.COM.BR

APN*123456*TIMBRASIL

APN*123456*ZAP.VIVO.COM.BR

USERNAME*123456*CLARO,CLARO

USERNAME*123456*OI,OI

USERNAME*123456*TIMBRASIL,TIMBRASIL

USERNAME*123456*VIVO,VIVO

Make sure to enter the exact data from your carrier.

4. Set DNS and Port

Set the DNS servers and port to ensure that the tracker can communicate correctly with the tracking server.

IP*123456*central.trackar.com.br,5040

5. Tracking Mode

Choose between the available tracking modes. Mode 1 is the default, while Mode 2 offers more dynamic control, activating the tracker only when in motion.

MODE*123456*1

MODE*123456*2

Mode 2 can save battery but limits the device's responsiveness.

6. Set Upload Interval

Adjust the time interval for data uploads. The interval can be set between 30 and 999 seconds, depending on monitoring needs.

INTERVAL*123456*60

The default interval is 30 seconds.

Special commands

Special Commands

Use the following commands to perform specific functions on the tracker.

CHECK*123456

URL*123456

CHECKPHONE*123456

CHECKPASSWORD#

ALARM*123456

RESET*123456

KEEPONLINE*123456

SHOCKCONTROLGPRS*123456

FACTORY*123456

These commands offer a variety of functions, from checking settings to restarting the device.