How to configure the CCTR CCTR-622G tracker

The CCTR CCTR-622G tracker is a robust and reliable tool for monitoring vehicles and assets. To ensure that you make the most of the functionalities of this device, it is essential to perform a proper configuration. In this guide, we will cover the necessary steps to configure your unit, including APN configuration, DNS server adjustments, IMEI verification, and functionality tests.

Configuring the APN (Access Point Name) is one of the crucial first steps, as it allows the tracker to connect to the mobile data network. Additionally, adjusting the DNS server is fundamental to ensure that information is transmitted correctly. Don't forget to check the IMEI of your device, which is a unique identifier essential for the tracker to function. Finally, we will conduct tests to confirm that all configurations are correct and that the device is operating as expected.

By following this tutorial, you will be able to configure the CCTR CCTR-622G efficiently, ensuring a safe and effective tracking experience. For even simpler management, consider the Trackar platform, which offers a one-time payment service to enhance its functionalities.

SMS Commands

1. Restore factory settings

To restore the device to factory settings, use the indicated command. This is essential if you need to reconfigure or troubleshoot the tracker.

FACTORY*123456

2. Set time zone

Adjusting the time zone is crucial to ensure that location information is accurate. Use the corresponding command to set the desired time zone.

TIMEZONE*123456*0

3. Carrier APN configuration

Correct APN configuration, along with the username and password, is crucial for the tracker to function. The information varies by carrier, so make sure to enter the correct data.

APN*123456*CLARO.BR

APN*123456*CLARO.COM.BR

APN*123456*GPRS.OI.COM.BR

APN*123456*SMART.M2M.VIVO.COM.BR

APN*123456*TIMBRASIL

APN*123456*ZAP.VIVO.COM.BR

USERNAME*123456*CLARO,CLARO

USERNAME*123456*OI,OI

USERNAME*123456*TIMBRASIL,TIMBRASIL

USERNAME*123456*VIVO,VIVO

Remember to check if the APN is correct for the chip used.

4. Set DNS and Port

Define the DNS servers and port to ensure that the tracker connects correctly to the network. It is important that the addresses are correct to avoid communication issues.

IP*123456*central.trackar.com.br,5013

5. Select tracking mode

Choose between different tracking modes according to your needs. The standard mode allows continuous operation, while the shock control mode saves battery.

MODE*123456*1

MODE*123456*2

Mode 2 turns off the tracker after 5 minutes of inactivity.

6. Set upload interval

Adjust the upload time in seconds, with a minimum of 30 and a maximum of 999. The factory default is 30 seconds.

INTERVAL*123456*60

Special commands

7. Special commands

Use the special commands below to access additional settings and perform specific operations on the tracker.

CHECK*123456

URL*123456

CHECKPHONE*123456

CHECKPASSWORD#

ALARM*123456

RESET*123456

KEEPONLINE*123456

SHOCKCONTROLGPRS*123456