How to configure the Suntech ST230 device via SMS

This guide shows how to connect the Suntech ST230 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Time Zone Configuration

The first step is to adjust the time zone of the tracker. This is crucial to ensure that all location data is accurate and relevant to the local time.

8960000w00

2. Setting Update Time with Ignition On

The next step is to configure the update interval while the vehicle's ignition is on. This time can be adjusted as needed, allowing for more frequent monitoring while the vehicle is in motion.

8050000 60

60 seconds is the default interval.

3. Setting Update Time with Ignition Off

Now, it is important to set the update interval when the ignition is off. This helps save battery and data when the vehicle is not in use.

8090000 3300

3300 seconds corresponds to 55 minutes.

4. Operator APN Configuration

Configuring the APN is essential to ensure that the tracker connects correctly to the mobile network. APN, username, and password information must be entered according to the operator used.

8030000 allcom.br

8030000 allcom.vivo.com.br

8030000 brt.br

8030000 claro.com.br

8030000 conect.algar.br

8030000 datatem.algar.br

8030000 eseye.com

8030000 gprs.amazoniacelular.com.br

8030000 gprs.oi.com.br

8030000 gprs.telemigcelular.com.br

8030000 jbgprs.algar.br

8030000 linksolutions.br

8030000 m2data.algar.br

8030000 m2data.arqia.br

8030000 m2data.vivo.com.br

8030000 m2m.vodafone.br

8030000 m2track.br,vivo,vivo#

8030000 meta.vivo.com.br

8030000 oktor.br

8030000 sercomtel.com.br

8030000 smart.m2m.vivo.com.br

8030000 ss.algar.br

8030000 tim.br

8030000 tmdata.tim.br

8030000 transmeet.br

8030000 up.m2m.vivo.com.br

8030000 virtueyes.vivo.com.br

8030000 voxter.algar.br

8030000 voxter.br

8030000 wap.ctbc.br

8030000 wl.vivo.com.br

8030000 y1.m2m.algar.com.br

8030000 zap.vivo.com.br

Check the specific information from your operator.

5. Activating GPRS Transmission

To ensure that the tracker sends data correctly, it is necessary to activate GPRS transmission. This is fundamental for the device's communication with the server.

7100000

6. DNS and Port Configuration

Configuring the DNS and server port is essential for the tracker to connect correctly to the monitoring platform. It is important to enter the correct data to avoid communication failures.

8040000 central.trackar.com.br,5011

7. Activating Motion Alert Without Key On

Finally, it is possible to activate a motion alert that does not depend on turning the key. The time interval can be adjusted according to the user's needs.

1810000T180

Special commands

8. Special Commands

In addition to the standard configurations, there are some special commands that can be used to manage the tracker more efficiently.

rconf

Restart

Sleep0000 5

9400000

9410000

6690000

SLEEP0000 10

Reset

format