How to Configure the Suntech ST-940 Device via SMS

This guide shows how to connect the Suntech ST-940 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Time Zone Configuration

The first essential step is configuring the device's time zone. This ensures that all location information is accurate and relevant to your current location.

8960000w00

2. Update with Ignition On

Set the update interval while the vehicle's ignition is on or in motion. The time is adjustable in seconds, with a default value of 60 seconds.

8050000 60

3. Update with Ignition Off

Configure the update interval while the ignition is off or the vehicle is stationary. The time can be adjusted, with an example of 3300 seconds, which is equivalent to 55 minutes.

8090000 3300

4. Carrier APN Configuration

It is crucial to enter the correct APN, username, and password information, as they vary according to the chip and carrier. Make sure to update with the correct data to ensure connectivity.

8030000 allcom.br

8030000 allcom.vivo.com.br

8030000 brt.br

8030000 claro.com.br

8030000 conect.algar.br

8030000 datatem.algar.br

8030000 eseye.com

8030000 gprs.amazoniacelular.com.br

8030000 gprs.oi.com.br

8030000 gprs.telemigcelular.com.br

8030000 jbgprs.algar.br

8030000 linksolutions.br

8030000 m2data.algar.br

8030000 m2data.arqia.br

8030000 m2data.vivo.com.br

8030000 m2m.vodafone.br

8030000 m2track.br,vivo,vivo#

8030000 meta.vivo.com.br

8030000 oktor.br

8030000 sercomtel.com.br

8030000 smart.m2m.vivo.com.br

8030000 ss.algar.br

8030000 tim.br

8030000 tmdata.tim.br

8030000 transmeet.br

8030000 up.m2m.vivo.com.br

8030000 virtueyes.vivo.com.br

8030000 voxter.algar.br nlt nlt

8030000 voxter.br

8030000 wap.ctbc.br

8030000 wl.vivo.com.br

8030000 y1.m2m.algar.com.br

8030000 zap.vivo.com.br

5. Activate GPRS Transmission

Activate GPRS transmission so that the tracker can send and receive data correctly.

7100000

6. Configure DNS and Port

It is necessary to configure the DNS servers and ports to ensure device communication. You can use the following servers as an example.

8040000 central.trackar.com.br,5011

7. Activate Motion Alert

Configure the motion alert without the need for the post key, adjusting the time in minutes as necessary.

1810000T180

Special commands

Special Commands

Use the special commands below to perform specific actions on the tracker.

rconf

Restart

Sleep0000 5

9400000

9410000

6690000

SLEEP0000 10

Reset

format