How to configure the MT Topten MT35 device via SMS

This guide shows how to connect the MT Topten MT35 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. DNS and Port Configuration

To ensure communication of the tracker, it is essential to correctly configure the DNS servers. We recommend using the domain's DNS, as shown in the examples below:

SET URL=central.trackar.com.br:6216

2. Carrier APN Configuration

APN settings, including username and password, must be adjusted according to the chip's carrier. Each provider may have different information, so it is important to verify the correct data before making the configuration.

SET APN=ALLCOM.BR:ALLCOM:ALLCOM

SET APN=JBGPRS.ALGAR.BR:ALGAR:ALGAR

SET APN=META.COM.BR:VIVO:VIVO

SET APN=SMART.M2M.VIVO.COM.BR:VIVO:VIVO

SET APN=TRANSMEET.BR:TRANSMEET:TRANSMEET

3. Communication Time Configuration with Ignition On

The transmission interval can be configured in seconds. The default setting is 60 seconds, which determines the communication frequency while the ignition is on.

SET T3 FREQ=060

4. Communication Time Configuration with Ignition Off

The communication time can be adjusted in minutes. The default is 55 minutes, which defines the communication interval when the ignition is off.

SET HEARTBEAT=55

These settings are recommended to optimize the device's operation.

Special commands

5. Special Commands

Below are some special commands that can be used to manage the tracker.

GET NTW

GET INFO

GET PROG

GET LOCATION

SET SLEEP_MODE=1

WAKE_UP

SET IGNITION_DETECTION=0

SET ENGINEV=13200

GET IGNITION_DETECTION

SET RELAY=1

SET RELAY=0

REBOOT