How to configure the MT MT2000 device via SMS
This guide shows how to connect the MT MT2000 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.
SMS Commands
4. APN Configuration
To configure the carrier's APN, use the following format, where you should enter your access credentials.
SET APN=APN:USUĂRIO:SENHA
Special commands
1. Initial Configuration of Trackers
The initial configuration of the tracker is crucial and varies according to the server used. It is essential to follow the specific instructions to ensure the proper functioning of the device.
Make sure to use the correct command according to the server you are configuring. ### 2. SP Server
For users of the SP server, the command to be sent is specific to ensure the correct connection of the device.
SET URL=dns.central.trackar.com.br:6216
### 3. AL Server
If you are using the AL server, use the appropriate command to ensure the communication of the tracker.
SET URL=ese.central.trackar.com.br:6216
### 5. Transmission Interval
Set the data transmission interval of the tracker. The example below configures a 30-second interval.
SET T3 FREQ=030
### 6. Additional Commands
There are additional commands that can be used to manage the device efficiently.
REBOOT
GET LOCATION
SET RELAY=1
SET RELAY=0
Use REBOOT to restart the device, GET LOCATION to obtain the current position, SET RELAY=1 to lock and SET RELAY=0 to unlock.
Own your tracking platform with a one-time payment