How to configure the MT MT01 device via SMS

This guide shows how to connect the MT MT01 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Server Configuration

It is recommended to use a domain DNS for the server configurations. You should set the server address according to the instructions below.

SET URL=central.trackar.com.br:6216

2. Carrier APN Configuration

The APN, username, and password information need to be updated with the correct data, as they vary according to the carrier and the chip used. Make sure to enter the appropriate information to ensure connectivity.

SET APN=ALLCOM.BR:ALLCOM:ALLCOM

SET APN=JBGPRS.ALGAR.BR:ALGAR:ALGAR

SET APN=META.COM.BR:VIVO:VIVO

SET APN=SMART.M2M.VIVO.COM.BR:VIVO:VIVO

SET APN=TRANSMEET.BR:TRANSMEET:TRANSMEET

3. Communication Time Configuration

Adjust the communication time based on the ignition situation. The time can be configured in seconds for ignition on and in minutes for ignition off, allowing for better battery consumption management.

SET T3 FREQ=060

SET HEARTBEAT=55

Special commands

4. Special Commands

Here are some special commands that can be used to manage the device more efficiently.

GET NTW

GET INFO

GET PROG

GET LOCATION

SET SLEEP_MODE=1

WAKE_UP

SET IGNITION_DETECTION=0

SET ENGINEV=13200

GET IGNITION_DETECTION

SET RELAY=1

SET RELAY=0

REBOOT