How to configure the MT Mini MT device via SMS

This guide shows how to connect the MT Mini MT tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. DNS and Port Configuration

To ensure efficient communication, it is essential to correctly configure the server's DNS and port. Use the recommended domain to ensure proper connection.

SET URL=central.trackar.com.br:6216

2. Carrier APN Configuration

The APN configuration is crucial and must be done according to the correct information provided by the chip carrier. Make sure to change the APN, username, and password as needed.

SET APN=ALLCOM.BR:ALLCOM:ALLCOM

SET APN=JBGPRS.ALGAR.BR:ALGAR:ALGAR

SET APN=META.COM.BR:VIVO:VIVO

SET APN=SMART.M2M.VIVO.COM.BR:VIVO:VIVO

SET APN=TRANSMEET.BR:TRANSMEET:TRANSMEET

The information may vary depending on the carrier used.

3. Communication Time with Ignition On

The transmission interval can be adjusted as needed. The time is defined in seconds, allowing you to control the frequency of location updates.

SET T3 FREQ=060

60 seconds is the default interval.

4. Communication Time with Ignition Off

Set the communication time when the ignition is off in minutes. This helps save battery and optimize communication.

SET HEARTBEAT=55

55 minutes is the default interval.

Special commands

5. Special Commands

Use special commands to efficiently manage and monitor the device.

GET NTW

GET INFO

GET PROG

GET LOCATION

SET SLEEP_MODE=1

WAKE_UP

SET IGNITION_DETECTION=0

SET ENGINEV=13200

GET IGNITION_DETECTION

SET RELAY=1

SET RELAY=0

REBOOT

These commands allow various functions, such as requesting information and controlling the device.