How to configure the Jimi NT202 device via SMS

This guide shows how to connect the Jimi NT202 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Time Zone Configuration

The first step is to correctly adjust the device's time zone. This is essential to ensure that location information is recorded accurately.

GMT,W,0#

2. Angle Position Configuration

Set the position by angle in degrees. You can adjust the detection range for curved points, where the value 0 disables this function. This is useful for optimizing tracking accuracy.

BEND,1,30#

3. Transmission Time in Motion

Adjust the transmission time interval while the device is in motion. The time can be set in seconds, with a default of 60 seconds.

TIMER,60#

4. Transmission Time Stationary

Configure the transmission time when the device is stationary. This time is adjustable in minutes, with the default set to 55 minutes.

STATIC,55#

5. Emergency Time

This command sets the emergency time, which allows location sending in case of a main power cut. The default value is 10 seconds.

EMERG,10#

6. Accelerometer Sensitivity

The accelerometer sensitivity can be adjusted in a range from 1 to 5, where 1 represents the most sensitive setting. This helps detect movements with greater accuracy.

VIBRATION,3#

7. Communication Protocol

Set the device's communication protocol to ensure an effective connection with the tracking platform.

SETLOCX12#

8. DNS and Port Configuration

It is necessary to configure the DNS server and port to ensure that the tracker connects correctly to the tracking platform. Three servers are provided as examples.

SERVER,8520,central.trackar.com.br,5013#

9. Carrier APN Configuration

The APN configuration is crucial and must be done based on the correct information provided by the chip carrier. Each carrier may have different settings that need to be adjusted.

APN,ALLCOM.ALGAR.BR,ALLCOM,ALLCOM#

APN,ALLCOM.BR,ALLCOM,ALLCOM#

APN,ALLCOM.VIVO.COM.BR,ALLCOM,ALLCOM#

APN,CLARO.COM.BR,CLARO,CLARO#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR,ARQIA,ARQIA#

APN,JBGPRS.BR,ARQIA,ARQIA#

APN,KORE.BR,KORE,KORE#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR,ALGAR,ALGAR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR,VODAFONE,VODAFONE#

APN,OKTOR.BR,OKTOR,OKTOR#

APN,POWERTECH,ALGAR,1212#

APN,SMART.M2M.VIVO.COM.BR,VIVO,VIVO#

APN,SS.ALGAR.BR,ALGAR,ALGAR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR,TRANSMEET,TRANSMEET#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR,VIVO,VIVO#

APN.BRT.BR#

APN.META.VIVO.COM.BR,META,META#

APN.NLT.COM.BR,NLT,NLT#

10. Force Position Communication

This command allows forcing a position communication via GPRS, useful to ensure that the location is updated in real time.

123

End of recommended settings.

Special commands

Special Commands

Below are the special commands that can be used to manage the tracker.

DYD,000000#

HFYD,000000#

RESET#

CLRG#

PARAM#

STATUS#

ACCVIRTON#

ACCVIRTOFF#

YSJ010#

GPS#

HBT,1#

URL#

WAKE,1#

SLEEP,5#

SLPON#

SLPOFF#

POWER1#

POWER0#

RELAY,1#

RELAY,0#

FACTORY#

Make sure the device is updated to use all commands.