How to configure the Jimi NT201 device via SMS

This guide shows how to connect the Jimi NT201 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Time Zone Configuration

Adjusting the time zone is essential to ensure that the tracker functions correctly. Use the specified command to set the desired time zone.

GMT,W,0#

2. Position Configuration by Angle

It is possible to set the position of the tracker based on a specific angle. The default value for curve points is 30°, but you can disable it by setting the value to 0.

BEND,1,30#

3. Transmission Time in Motion

The transmission time while the device is in motion can be adjusted. The default is 60 seconds, but you can modify this time as needed.

TIMER,60#

4. Transmission Time Stopped

Just like the movement time, the transmission time when the device is stopped can also be modified. The default is 55 minutes.

STATIC,55#

5. Emergency Time

Set the time in which the tracker should send the location in case of a power cut. The default is 10 seconds.

EMERG,10#

6. Accelerometer Sensitivity

The sensitivity of the accelerometer can be adjusted on a scale from 1 to 5, where 1 is the most sensitive. Adjust according to monitoring needs.

VIBRATION,3#

7. Communication Protocol

Configure the communication protocol of the tracker to ensure correct data transmission.

SETLOCX12#

8. DNS and Port Configuration

It is necessary to configure the DNS server and port so that the tracker can connect correctly to the platform.

SERVER,8520,central.trackar.com.br,5013#

9. Carrier APN Configuration

The APN configuration is crucial for the tracker to function. APN, username, and password information must be updated according to the carrier used.

APN,ALLCOM.ALGAR.BR,ALLCOM,ALLCOM#

APN,ALLCOM.BR,ALLCOM,ALLCOM#

APN,ALLCOM.VIVO.COM.BR,ALLCOM,ALLCOM#

APN,CLARO.COM.BR,CLARO,CLARO#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR,ARQIA,ARQIA#

APN,JBGPRS.BR,ARQIA,ARQIA#

APN,KORE.BR,KORE,KORE#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR,ALGAR,ALGAR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR,VODAFONE,VODAFONE#

APN,OKTOR.BR,OKTOR,OKTOR#

APN,POWERTECH,ALGAR,1212#

APN,SMART.M2M.VIVO.COM.BR,VIVO,VIVO#

APN,SS.ALGAR.BR,ALGAR,ALGAR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR,TRANSMEET,TRANSMEET#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR,VIVO,VIVO#

APN.BRT.BR#

APN.META.VIVO.COM.BR,META,META#

APN.NLT.COM.BR,NLT,NLT#

10. Force Position Communication

If necessary, you can force the tracker to send its position immediately. Use the appropriate command for this.

123

It is recommended to perform these configurations to ensure optimal device operation.

Special commands

1. Special Commands

Special commands allow for more advanced management of the device. Use them with caution.

DYD,000000#

HFYD,000000#

RESET#

CLRG#

PARAM#

STATUS#

ACCVIRTON#

ACCVIRTOFF#

YSJ010#

GPS#

HBT,1#

URL#

WAKE,1#

SLEEP,5#

SLPON#

SLPOFF#

POWER1#

POWER0#

RELAY,1#

RELAY,0#

FACTORY#

Make sure your device is updated to use some of these features.