How to configure the Jimi JM08 device via SMS

This guide shows how to connect the Jimi JM08 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Time Zone Configuration

It is essential that the device's time zone is set correctly to ensure accuracy in location reports. Use the appropriate command to adjust the time zone as needed.

GMT,W,0,0#

2. Update Time Adjustment

The update time determines how frequently the device sends location data. You can customize this interval, which should be between 5 and 18000 seconds, with default values of 10 seconds for both ignition on and off.

TIMER,60,3300#

3. External Voltage Activation

Activate the external voltage to monitor the amount of analog upload. The value should be adjusted between 5 and 3600, depending on your needs.

ADT,ON,3600#

4. DNS and Port Configuration

It is necessary to configure the server for the tracker. The command should be adjusted with the server address and the correct port to ensure effective communication.

SERVER,1,central.trackar.com.br,5023,0#

5. Carrier APN Configuration

The APN configuration is crucial as it varies according to the carrier and the chip used. Make sure to enter the correct information to ensure connectivity.

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,BRT.BR#

APN,CLARO.COM.BR#

APN,CONEXAO.GETRAK.COM.BR#

APN,ESEYE.COM#

APN,FEDERAL.BR#

APN,GPRS.OI.COM.BR#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,HINOVA.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,META.VIVO.COM.BR#

APN,OKTOR.BR#

APN,POWERTECH.ALGAR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,SS.CLARO.COM.BR#

APN,TIM.BR#

APN,TRANSMEET.BR#

APN,VIRTUEYES.COM.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,WAP.CTBC.BR#

APN,WL.VIVO.COM.BR#

APN,ZAP.VIVO.COM.BR#

6. GPRS Activation

To allow the device to connect to the mobile data network, it is necessary to activate GPRS using the corresponding command.

GPRSON,1#

7. Satellite Receiver Activation

Activate the satellite receiver for a period of 5 minutes to ensure that the device can accurately locate its position.

GPSON#

Special commands

Special Commands

Special commands allow additional queries and adjustments on the device. Use them as needed to manage and monitor the tracker.

PARAM#

SCXSZ#

GPRSSET#

STATUS#

ADT,OFF#

GPRSON,0#

GPRSON#

GPSDUP,A#

GPSDUP#

EXBATALM,ON#

EXBATALM,OFF#

RELAY,1#

RELAY,0#

ASETAPN,ON#

ASETAPN,OFF#

ANGLEREP,ON,20,2#

DISTANCE,300#

ICCID#

IMSI#

DOOR,0#

DOOR,1#

CLEAR#

WHERE#

URL#

POSITION#

VERSION#

RESET#

FACTORYALL#