How to configure the Jimi JM01 device via SMS

This guide shows how to connect the Jimi JM01 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Time Zone Configuration

It is essential to adjust the device's time zone so that location information is accurate. Use the appropriate command to set the GMT.

GMT,W,0,0#

2. Update Time Configuration

The tracker’s update time can be adjusted between 5 and 18000 seconds. The interval X is the transmission time while the vehicle is moving, and Y is the time when the vehicle is stationary.

TIMER,60,3300#

3. Activate Voltage (External Voltage)

The external voltage setting should be adjusted as needed, with values ranging from 5 to 3600. This allows monitoring of the vehicle's voltage.

ADT,ON,3600#

4. Server Configuration

The servers must be configured correctly to ensure the device communicates with the tracking platform. Use the command to set the desired servers.

SERVER,1,central.trackar.com.br,5023,0#

5. Operator APN Configuration

The correct APN configuration is crucial for device connectivity. Check the operator's information and adjust as necessary.

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,BRT.BR#

APN,CLARO.COM.BR#

APN,CONEXAO.GETRAK.COM.BR#

APN,ESEYE.COM#

APN,FEDERAL.BR#

APN,GPRS.OI.COM.BR#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,HINOVA.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,META.VIVO.COM.BR#

APN,OKTOR.BR#

APN,POWERTECH.ALGAR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,SS.CLARO.COM.BR#

APN,TIM.BR#

APN,TRANSMEET.BR#

APN,VIRTUEYES.COM.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,WAP.CTBC.BR#

APN,WL.VIVO.COM.BR#

APN,ZAP.VIVO.COM.BR#

6. Activate GPRS

To connect the device to the network, it is necessary to activate GPRS. Use the corresponding command for this configuration.

GPRSON,1#

7. Activate Satellite Receiver

The satellite receiver can be activated for a period of 5 minutes to locate the device. Use the command to perform this activation.

GPSON#

Special commands

Special Commands

These additional commands allow for more advanced management of the device.

PARAM#

SCXSZ#

GPRSSET#

STATUS#

ADT,OFF#

GPRSON,0#

GPRSON#

GPSDUP,A#

GPSDUP#

EXBATALM,ON#

EXBATALM,OFF#

RELAY,1#

RELAY,0#

ASETAPN,ON#

ASETAPN,OFF#

ANGLEREP,ON,20,2#

DISTANCE,300#

ICCID#

IMSI#

DOOR,0#

DOOR,1#

CLEAR#

WHERE#

URL#

POSITION#

VERSION#

RESET#

FACTORYALL#