How to configure the Jimi JM-VL03 device via SMS

This guide shows how to connect the Jimi JM-VL03 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Time Zone Configuration

It is essential to adjust the device's time zone to ensure that location data is recorded correctly. Use the appropriate command to set the desired time zone.

GMT,W,0,0#

2. Update Time Adjustment

Set the time interval for location updates. The time can be adjusted between 5 and 18000 seconds, with the default values being 10 seconds for both movement and stop.

TIMER,60,3300#

3. External Voltage Activation

You can configure the external voltage that the device will use. The value must be adjusted between 5 and 3600, depending on the data upload needs.

ADT,ON,3600#

4. Server and Port Configuration

Configure the server and port for the tracker communication. It is important that the information is correct to ensure the connection.

SERVER,1,central.trackar.com.br,5023,0#

5. Carrier APN Configuration

The APN configuration is essential and must be done with the correct information for each carrier. This ensures that the device can connect to the network.

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,BRT.BR#

APN,CLARO.COM.BR#

APN,CONEXAO.GETRAK.COM.BR#

APN,ESEYE.COM#

APN,FEDERAL.BR#

APN,GPRS.OI.COM.BR#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,HINOVA.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,META.VIVO.COM.BR#

APN,OKTOR.BR#

APN,POWERTECH.ALGAR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,SS.CLARO.COM.BR#

APN,TIM.BR#

APN,TRANSMEET.BR#

APN,VIRTUEYES.COM.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,WAP.CTBC.BR#

APN,WL.VIVO.COM.BR#

APN,ZAP.VIVO.COM.BR#

6. GPRS Activation

Activate GPRS to allow data transmission. This step is essential for the tracker to send location information.

GPRSON,1#

7. Satellite Receiver Activation

Activate the satellite receiver for a period of 5 minutes to ensure that the device can locate its position.

GPSON#

Special commands

Special Commands

Here are some special commands that can be used to manage and query device settings.

PARAM#

SCXSZ#

GPRSSET#

STATUS#

ADT,OFF#

GPRSON,0#

GPRSON#

GPSDUP,A#

GPSDUP#

EXBATALM,ON#

EXBATALM,OFF#

RELAY,1#

RELAY,0#

ASETAPN,ON#

ASETAPN,OFF#

ANGLEREP,ON,20,2#

DISTANCE,300#

ICCID#

IMSI#

DOOR,0#

DOOR,1#

CLEAR#

WHERE#

URL#

POSITION#

VERSION#

RESET#

FACTORYALL#