How to configure the Jimi JM-VL01 device via SMS

This guide shows how to connect the Jimi JM-VL01 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Time Zone Configuration

To ensure the tracker functions correctly, it is essential to set the time zone. Use the appropriate command to adjust the time according to your location.

GMT,W,0,0#

2. Update Interval Adjustment

The tracker’s update time can be adjusted between 5 and 18000 seconds. The factory default is 10 seconds for both ignition on and off. Adjust as needed to optimize tracking.

TIMER,60,3300#

3. External Voltage Activation

Activate the external voltage for continuous monitoring. The analog upload should be set between 5 and 3600 seconds, depending on the monitoring needs.

ADT,ON,3600#

4. Server Configuration

It is necessary to configure the server address and port to ensure that the tracker sends data correctly. Use the commands to set the desired server.

SERVER,1,central.trackar.com.br,5023,0#

5. APN Configuration

APN configuration is crucial for device connectivity. Ensure to enter the correct carrier information, as it varies by SIM card provider. Use the listed commands for each carrier.

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,BRT.BR#

APN,CLARO.COM.BR#

APN,CONEXAO.GETRAK.COM.BR#

APN,ESEYE.COM#

APN,FEDERAL.BR#

APN,GPRS.OI.COM.BR#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,HINOVA.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,META.VIVO.COM.BR#

APN,OKTOR.BR#

APN,POWERTECH.ALGAR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,SS.CLARO.COM.BR#

APN,TIM.BR#

APN,TRANSMEET.BR#

APN,VIRTUEYES.COM.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,WAP.CTBC.BR#

APN,WL.VIVO.COM.BR#

APN,ZAP.VIVO.COM.BR#

6. GPRS Activation

Activate GPRS to allow data communication from the tracker. This step is crucial to ensure that the device sends location information.

GPRSON,1#

7. Satellite Receiver Activation

To ensure the tracker can capture the location, activate the satellite receiver for a period of 5 minutes. This is essential for the initial operation of the device.

GPSON#

Special commands

Special Commands

Below are additional commands that can be used to manage and query device settings.

PARAM#

SCXSZ#

GPRSSET#

STATUS#

ADT,OFF#

GPRSON,0#

GPRSON#

GPSDUP,A#

GPSDUP#

EXBATALM,ON#

EXBATALM,OFF#

RELAY,1#

RELAY,0#

ASETAPN,ON#

ASETAPN,OFF#

ANGLEREP,ON,20,2#

DISTANCE,300#

ICCID#

IMSI#

DOOR,0#

DOOR,1#

CLEAR#

WHERE#

URL#

POSITION#

VERSION#

RESET#

FACTORYALL#