How to configure the GPS TK10 device via SMS

This guide shows how to connect the GPS TK10 tracker to the platform using SMS commands. Send each command from the chip installed in the device, in the order indicated below.

SMS Commands

1. Start of Configuration

To start using your tracker, it is necessary to begin the configuration of the equipment. Use the appropriate command for this.

begin123456

2. Time Zone Configuration

It is important to adjust the time zone of the device. The command to be used must include the correct configuration of your time zone, which can be adjusted as needed.

timezone123456 0

3. APN Configuration

The APN configuration is crucial for the functioning of the tracker. APN, username, and password information must be updated according to the details provided by the chip operator you are using.

apn,m2track.br,vivo,vivo#

apn123456 allcom.br

apn123456 allcom.vivo.com.br

apn123456 brt.br

apn123456 claro.com.br

apn123456 datatem.algar.br

apn123456 eseye.com

apn123456 gprs.amazoniacelular.com.br

apn123456 gprs.oi.com.br

apn123456 gprs.telemigcelular.com.br

apn123456 linksolutions.br

apn123456 m2data.algar.br

apn123456 m2data.arqia.br

apn123456 m2data.vivo.com.br

apn123456 m2m.vodafone.br

apn123456 m2mprepgago.br arqia arqia

apn123456 meta.vivo.com.br meta meta

apn123456 oktor.br

apn123456 sercomtel.com.br

apn123456 smart.m2m.vivo.com.br

apn123456 ss.algar.br

apn123456 tim.br

apn123456 tmdata.tim.br

apn123456 transmeet.br

apn123456 virtueyes.vivo.com.br

apn123456 voxter.algar.br

apn123456 voxter.br

apn123456 wap.ctbc.com.br

apn123456 wl.vivo.com.br

apn123456 y1.m2m.algar.com.br

apn123456 zap.vivo.com.br

4. IP and Port Configuration

To ensure the correct communication of the tracker, it is necessary to configure the IP and port of the server. Make sure to enter the correct data for each server you wish to use.

Servidor 01:

Servidor 02:

Servidor 03:

5. Enable GPRS Transmission

Activate data transmission via GPRS so that the tracker can send location information. Use the indicated command to enable this function.

gprs123456 1

6. Tracking Mode Configuration

Set the time interval for data transmission. The time can be adjusted in seconds, and the default is 60 seconds. Use the appropriate command to adjust this time.

itv123456 60

It is recommended to finalize the configurations after this step.

Special commands

Special Commands

Here are some special commands that can be used to check and modify specific settings of the device.

check123456

getimei123456

speed123456 80

speed123456 0

DY123456 1

TY123456 1