How to configure the GPS G900 device via SMS

This guide shows how to connect the GPS G900 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Start of Equipment Configuration

To begin the configuration of your GPS device G900, it is necessary to use the specific command. This step is crucial to ensure that the equipment is ready for use.

begin123456

2. Time Zone Configuration

Adjusting the time zone is essential for the tracker to function correctly. Use the appropriate command to set the time zone according to your location.

timezone123456 0

3. Carrier APN Configuration

Configuring the APN is essential for the tracker to connect to the data network. It is important to enter the correct APN, username, and password information, as they vary by carrier. Below are the commands for different APNs.

apn,m2track.br,vivo,vivo#

apn123456 allcom.br

apn123456 allcom.vivo.com.br

apn123456 brt.br

apn123456 claro.com.br

apn123456 datatem.algar.br

apn123456 eseye.com

apn123456 gprs.amazoniacelular.com.br

apn123456 gprs.oi.com.br

apn123456 gprs.telemigcelular.com.br

apn123456 linksolutions.br

apn123456 m2data.algar.br

apn123456 m2data.arqia.br

apn123456 m2data.vivo.com.br

apn123456 m2m.vodafone.br

apn123456 m2mprepgago.br arqia arqia

apn123456 meta.vivo.com.br meta meta

apn123456 oktor.br

apn123456 sercomtel.com.br

apn123456 smart.m2m.vivo.com.br

apn123456 ss.algar.br

apn123456 tim.br

apn123456 tmdata.tim.br

apn123456 transmeet.br

apn123456 virtueyes.vivo.com.br

apn123456 voxter.algar.br

apn123456 voxter.br

apn123456 wap.ctbc.com.br

apn123456 wl.vivo.com.br

apn123456 y1.m2m.algar.com.br

apn123456 zap.vivo.com.br

Make sure that the APN information is correct for the carrier used.

4. IP and Port Configuration

To ensure proper communication of the tracker, it is necessary to configure the IP and port of the server. Enter the desired server information.

Fill in the fields with the information for server 01, 02, and 03.

5. Enable GPRS Transmission

Activate data transmission via GPRS using the appropriate command. This is essential for the tracker to send real-time information.

gprs123456 1

6. Tracking Mode Configuration

Set the time interval for tracking, which can be adjusted according to your needs. The default value for transmission is 60 seconds.

itv123456 60

The transmission time can be adjusted as needed.

Special commands

Special Commands

Below are some special commands that can be used to check configurations and control the device.

check123456

getimei123456

speed123456 80

speed123456 0

DY123456 1

TY123456 1

Use these commands to monitor and control the device as needed.