How to configure the Dyegoo GT02 device via SMS

This guide shows how to connect the Dyegoo GT02 tracker to the platform using SMS commands. Send each command from the chip installed in the device, in the order indicated below.

SMS Commands

1. Time Zone Configuration

The first essential step is to adjust the device's time zone. This ensures that all operations and location records are correctly synchronized with the local time.

801#W0#

2. Carrier APN Configuration

Configuring the APN is crucial for the proper functioning of the tracker. The information must be entered correctly, as it varies depending on the carrier and the SIM card used. Make sure to use the correct APN, username, and password.

802#claro.com.br#claro#claro#

802#smart.m2m.vivo.com.br#vivo#vivo#

802#transmeet.br#transmeet#transmeet#

802#zap.vivo.com.br#vivo#vivo#

3. DNS and Port Configuration

In this step, you must define the DNS servers and the ports that the device will use to connect. This is essential to ensure proper communication between the tracker and the server.

803#central.trackar.com.br#6002#

4. Setting Transmission Time in Motion

Adjust the transmission interval of the tracker while it is in motion. The time can be configured between 10 and 60 seconds, allowing flexibility according to monitoring needs.

730#60#

5. Setting Transmission Time When Stationary

Here, you can adjust the transmission time while the device is stationary. The interval can be configured between 1 and 60 minutes, allowing for more efficient tracking control.

SUP#55#

It is recommended to finalize the settings after this step.

Special commands

6. Special Commands

These additional commands allow you to check and manage various functions of the device.

886#

CIP#

902#

NUP#

222#

333#

930#

666#

C10#

901#

940#

Use these commands as needed to monitor and configure the tracker.