How to configure the CRX1 ET100 device via SMS

This guide shows how to connect the CRX1 ET100 tracker to the platform using SMS commands. Send each command from the chip installed in the device, in the order indicated below.

SMS Commands

1. Time Zone Configuration

It is essential to adjust the device's time zone to ensure that location data is accurate. Use the appropriate command to set the GMT, as well as the hour, minute, and second settings.

GMT,W,0,0#

2. Update Time Adjustment

The location data update interval can be customized. It is important to correctly configure the transmission time while the vehicle is moving or stationary. The interval ranges from 5 seconds to 18000 seconds, with default values set.

TIMER,60,3300#

The X value represents the 60-second interval while the ignition is on, and Y represents 3300 seconds when the ignition is off.

3. Activate Voltage (External Voltage)

It is necessary to set the amount of analog upload to monitor the device's external voltage. This will help ensure that the tracker’s power supply is always within the required parameters.

ADT,ON,3600#

4. DNS and Port Configuration

Set the servers and ports that the tracker will use for communication. It is crucial that the information is correct to ensure connection with the monitoring platform.

SERVER,1,central.trackar.com.br,5023,0#

5. Carrier APN Configuration

Configuring the APN is essential to ensure that the tracker connects to the correct carrier network. You must enter the specific information for your carrier, as it may vary.

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,BRT.BR#

APN,CLARO.COM.BR#

APN,CONEXAO.GETRAK.COM.BR#

APN,ESEYE.COM#

APN,FEDERAL.BR#

APN,GPRS.OI.COM.BR#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,HINOVA.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,KORE.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,META.VIVO.COM.BR#

APN,OKTOR.BR#

APN,POWERTECH.ALGAR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,SS.CLARO.COM.BR#

APN,TIM.BR#

APN,TRANSMEET.BR#

APN,VIRTUEYES.COM.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,WAP.CTBC.BR#

APN,WL.VIVO.COM.BR#

APN,ZAP.VIVO.COM.BR#

6. Activate GPRS

Enable GPRS to ensure that the tracker can connect to the mobile data network. This is essential for the tracker’s operation.

GPRSON,1#

7. Activate Satellite Receiver

Activate the satellite receiver for a period of 5 minutes to ensure that the tracker can accurately locate the current position of the vehicle.

GPSON#

Special commands

Special Commands

These commands allow you to query and modify various settings of the tracking device, ensuring that you have full control over the tracker’s operation.

PARAM#

SCXSZ#

GPRSSET#

STATUS#

ADT,OFF#

GPRSON,1#

GPRSON,0#

GPRSON#

GPSDUP,A#

GPSDUP#

EXBATALM,ON#

EXBATALM,OFF#

RELAY,1#

RELAY,0#

ASETAPN,ON#

ASETAPN,OFF#

ANGLEREP,ON,30,3#

ANGLEREP#

ANGLEREP,OF#

DISTANCE,300#

ICCID#

IMSI#

DOOR,0#

DOOR,1#

CLEAR#

WHERE#

URL#

POSITION#

VERSION#

RESET#

FACTORY#

FACTORYALL#