How to configure the Concox SL28 device via SMS

This guide shows how to connect the Concox SL28 tracker to the platform using SMS commands. Send each command from the chip installed in the device, in the order indicated below.

SMS Commands

1. Time Zone Configuration

It is essential to correctly adjust the device's time zone to ensure that location information is accurate. Use the appropriate command to set GMT.

GMT,W,0,0#

2. Update Interval Configuration

Set the update interval for the tracker while in motion and stationary. The first value refers to the time in motion and the second when stationary. Adjust as needed.

TIMER,20,20#

3. Angle Update

Configure location updates based on a specific angle and detection time. This helps optimize tracking in motion situations.

ANGLEREP,ON,30,2#

4. Heartbeat Configuration

The heartbeat is the interval at which the tracker sends data when the ignition is on or off. Adjust these values to meet your monitoring needs.

HB,1,55#

5. Server and Port Configuration

It is essential to configure the server and port correctly to ensure communication between the tracker and the monitoring platform. Use the appropriate commands for this.

SERVER,1,central.trackar.com.br,5023,0#

6. Carrier APN Configuration

APN settings are crucial for the tracker to connect to the carrier's network. It is important to enter the correct data, which varies according to the chip supplier and the carrier used.

APN,AGILIS.ALGAR.BR#

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,CLARO.COM.BR#

APN,DATATEM.ALGAR.BR#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,OKTOR.BR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR#

APN.BRT.BR#

APN.META.VIVO.COM.BR#

7. Force Position Sending

This command is useful for forcing the tracker to send its positions during a specific period. Ideal for situations where intense monitoring is required.

LJDW#

Special commands

Special Commands

These commands offer additional functionalities for the tracker, allowing for quick queries and adjustments.

PARAM#

GPRSSET#

STATUS#

STA_SENDGPS,1#

STA_SENDGPS,0#

STA_SENDGPS#

SENDS,0#

SOS,A,XXXXXXXXXXX#

CENTER,A,XXXXXXXXXXX#

CENTER,D#

SOS,D,XXXXXXXXXXX#

RELAY,1#

RELAY,0#

ANGLEREP,ON,30,2#

ICCID#

HBT,1,55#

DW#

WHERE#

RESET#

FACTORY#