How to configure the Concox SL22 device via SMS

This guide shows how to connect the Concox SL22 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Time Zone Configuration

It is essential to set the device's time zone to ensure that location information is accurate. Use the appropriate command to adjust as needed.

GMT,W,0,0#

2. Update Time Adjustment

The tracker’s update interval can be adjusted in seconds. It is necessary to set two values: one for when the vehicle is in motion and another when it is stationary.

TIMER,20,20#

3. Angle-Based Update

Configure the location update based on a specific angle and detection time. This allows for a quicker response to changes in the vehicle's direction.

ANGLEREP,ON,30,2#

4. Heartbeat Configuration

The heartbeat interval can be adjusted to monitor the vehicle's activity. It is important to set different intervals for when the ignition is on and off.

HB,1,55#

5. Server Configuration

It is necessary to configure the server that the tracker will use to send data. This is done through commands that define the server and port.

SERVER,1,central.trackar.com.br,5023,0#

6. Carrier APN Configuration

APN, username, and password information must be adjusted according to the carrier of the chip used. This is crucial to ensure device connectivity.

APN,AGILIS.ALGAR.BR#

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,CLARO.COM.BR#

APN,DATATEM.ALGAR.BR#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,OKTOR.BR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR#

APN.BRT.BR#

APN.META.VIVO.COM.BR#

7. Force Position Sending

If necessary, you can force the device to send its positions for a period of 5 minutes. This can be useful in emergency situations or intensive monitoring.

LJDW#

Special commands

Special Commands

These additional commands allow you to query and change specific settings of the tracker.

PARAM#

GPRSSET#

STATUS#

STA_SENDGPS,1#

STA_SENDGPS,0#

STA_SENDGPS#

SENDS,0#

SOS,A,XXXXXXXXXXX#

CENTER,A,XXXXXXXXXXX#

CENTER,D#

SOS,D,XXXXXXXXXXX#

RELAY,1#

RELAY,0#

ANGLEREP,ON,30,2#

ICCID#

HBT,1,55#

DW#

WHERE#

RESET#

FACTORY#

Remember that some commands may consume more vehicle battery.