How to configure the Concox GT06 device via SMS

This guide shows how to connect the Concox GT06 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Time Zone Configuration

The first step to configuring your GT06 tracker is to correctly set the time zone. This is essential to ensure that all location data is accurate and synchronized with local time.

801#W0#

2. Carrier APN Configuration

It is essential that the APN, username, and password settings are adjusted according to the specifications of the chip provider and the carrier. This ensures that the device has access to the data network.

802#claro.com.br#claro#claro

802#smart.m2m.vivo.com.br#vivo#vivo#

802#transmeet.br#transmeet#transmeet#

802#zap.vivo.com.br#vivo#vivo#

The information should be updated according to the carrier used.

3. DNS and Port Configuration

In this step, you need to set the DNS servers and the port that the tracker will use to connect. It is important to have the correct data to ensure efficient communication.

803#central.trackar.com.br#6023#

4. Transmission Time Setting in Motion

Here you can adjust the transmission interval when the device is in motion. The time can be set between 10 and 60 seconds, allowing you to adapt the update frequency as needed.

730#60#

5. Transmission Time Setting When Stationary

This setting allows you to adjust the transmission interval when the device is stationary. The interval can vary from 1 to 60 minutes, helping to save battery when there is no movement.

SUP#55#

It is recommended to finalize the settings after this step.

Special commands

6. Special Commands

Below are some special commands that can be used to manage and monitor the device.

886#

CIP#

902#

222#

333#

930#

666#

C10#

901#

940#

These commands allow checks, locks, unlocks, and reboots of the device.