How to configure the Concox G19S device via SMS

This guide shows how to connect the Concox G19S tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Time Zone Configuration

The first step is to adjust the device's time zone. This is essential to ensure that location data is accurate in relation to the local time.

GMT,W,0,0#

2. Update Interval Configuration

In this step, you can set the tracker’s update interval. The interval can be adjusted for different situations, such as moving or stationary.

TIMER,20,20#

X represents the interval when moving and Y the interval when stationary.

3. Angle Update

Configure the tracker to update its location based on a specific angle. This is useful for monitoring changes in direction.

ANGLEREP,ON,30,2#

4. Heartbeat Configuration

Adjust the device's heartbeat interval, which determines how often it sends data when the ignition is on or off.

HB,1,55#

5. Server Configuration

It is necessary to configure the server for the tracker. You can set up to three servers, but all must have the same information.

SERVER,1,central.trackar.com.br,5023,0#

6. Carrier APN Configuration

The correct APN configuration is crucial for the tracker’s operation. The information may vary according to the carrier, so it is important to check the specific data.

APN,AGILIS.ALGAR.BR#

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,CLARO.COM.BR#

APN,DATATEM.ALGAR.BR#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,OKTOR.BR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR#

APN.BRT.BR#

APN.META.VIVO.COM.BR#

7. Force Position Sending

This command allows the tracker to send its positions for a period of five minutes. This can be useful for real-time monitoring.

LJDW#

Special commands

Special Commands

These additional commands allow you to manage and query the tracker's settings.

PARAM#

GPRSSET#

STATUS#

STA_SENDGPS,1#

STA_SENDGPS,0#

STA_SENDGPS#

SENDS,0#

SOS,A,XXXXXXXXXXX#

CENTER,A,XXXXXXXXXXX#

CENTER,D#

SOS,D,XXXXXXXXXXX#

RELAY,1#

RELAY,0#

ANGLEREP,ON,30,2#

ICCID#

HBT,1,55#

DW#

WHERE#

RESET#

FACTORY#

Use these commands with caution, as some may alter important device settings.