How to configure the Concox G19H device via SMS

This guide shows how to connect the Concox G19H tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Time Zone Configuration

It is essential to start the tracker configuration by adjusting the time zone. This ensures that location information is accurate and corresponds to the vehicle's locality.

GMT,W,0,0#

2. Update Time Configuration

The update time is an important parameter that defines the frequency with which the tracker will send location information. You can adjust the sending intervals while the vehicle is in motion or stopped.

TIMER,20,20#

3. Angle Update

This configuration allows the tracker to update its position based on a specific angle. This can be useful for accurately monitoring changes in direction.

ANGLEREP,ON,30,2#

4. Heartbeat Configuration

The heartbeat is a signal sent periodically to indicate that the tracker is active. You can adjust the sending interval based on the vehicle's ignition status.

HB,1,55#

5. DNS and Port Configuration

It is necessary to configure the server details to ensure that the tracker connects correctly to the monitoring platform. Server information must be entered accurately.

SERVER,1,central.trackar.com.br,5023,0#

6. Carrier APN Configuration

APN settings are essential to ensure that the tracker can connect to the internet. Make sure to enter the correct information according to the chip carrier used.

APN,AGILIS.ALGAR.BR#

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,CLARO.COM.BR#

APN,DATATEM.ALGAR.BR#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,OKTOR.BR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR#

APN.BRT.BR#

APN.META.VIVO.COM.BR#

7. Force Position Sending

If necessary, you can force the tracker to send its position for a period of 5 minutes. This can be useful for real-time monitoring.

LJDW#

Special commands

8. Special Commands

Here are some special commands that can be used for additional queries and configurations of the tracker.

PARAM#

GPRSSET#

STATUS#

STA_SENDGPS,1#

STA_SENDGPS,0#

STA_SENDGPS#

SENDS,0#

SOS,A,XXXXXXXXXXX#

CENTER,A,XXXXXXXXXXX#

CENTER,D#

SOS,D,XXXXXXXXXXX#

RELAY,1#

RELAY,0#

ANGLEREP,ON,30,2#

ICCID#

HBT,1,55#

DW#

WHERE#

RESET#

FACTORY#

Remember that some commands may consume more vehicle battery.