How to configure the Concox G19 device via SMS

This guide shows how to connect the Concox G19 tracker to the platform using SMS commands. Send each command from the chip installed in the device, in the order indicated below.

SMS Commands

1. Time Zone Configuration

The first essential step is to configure the device's time zone. This ensures that location information is recorded correctly according to your region.

GMT,W,0,0#

2. Update Time Definition

Adjust the location update interval. You can set different times for when the vehicle is in motion and when it is stationary, allowing for more efficient communication management.

TIMER,20,20#

X represents the interval in motion and Y the interval when stationary.

3. Angle-Based Update

Configure the location update of the tracker based on a specific angle. This helps optimize accuracy during movement.

ANGLEREP,ON,30,2#

The angle is defined in degrees, and you can adjust the detection time.

4. Heartbeat

The heartbeat function allows the tracker to send updates at regular intervals, depending on whether the ignition is on or off.

HB,1,55#

X is the interval with ignition on and Y with ignition off.

5. DNS and Port Configuration

It is crucial to correctly configure the server and port to ensure that the tracker connects to the appropriate network.

SERVER,1,central.trackar.com.br,5023,0#

Make sure the server address is correct.

6. APN Configuration

Configuring the APN is essential and must be adjusted according to the carrier used. Incorrect information can result in communication failures.

APN,AGILIS.ALGAR.BR#

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,CLARO.COM.BR#

APN,DATATEM.ALGAR.BR#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,OKTOR.BR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR#

APN.BRT.BR#

APN.META.VIVO.COM.BR#

Make sure to use the correct details for your carrier.

7. Force Position Sending

If you need to send the tracker's location immediately, you can force the sending for a period of 5 minutes.

LJDW#

Special commands

8. Special Commands

Here are some additional commands that can be used to manage and query the tracker's settings.

PARAM#

GPRSSET#

STATUS#

STA_SENDGPS,1#

STA_SENDGPS,0#

STA_SENDGPS#

SENDS,0#

SOS,A,XXXXXXXXXXX#

CENTER,A,XXXXXXXXXXX#

CENTER,D#

SOS,D,XXXXXXXXXXX#

RELAY,1#

RELAY,0#

ANGLEREP,ON,30,2#

ICCID#

HBT,1,55#

DW#

WHERE#

RESET#

FACTORY#

Be sure to use these commands carefully to avoid unwanted changes to the settings.