How to configure the Coban TW-MD1101 device via SMS

This guide shows how to connect the Coban TW-MD1101 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Start of Equipment Configuration

To begin configuring your GPS tracker, send the initial command. This is the first essential step to ensure that the device functions correctly.

begin123456

2. Time Zone Configuration

Adjust the time zone of the tracker so that it correctly records the local time. Use the appropriate command to set the desired time zone.

time zone123456 0

3. Carrier APN Configuration

It is crucial to enter the correct APN, username, and password information, as this data varies according to the chip carrier used. Make sure to use the appropriate commands for your carrier.

apn123456 allcom.br

apn123456 linksolutions.br

apn123456 m2data.arqia.br

apn123456 smart.m2m.vivo.com.br

apn123456 tim.br

apn123456 transmeet.br

apn123456 virtueyes.com.br

apn123456 zap.vivo.com.br

4. DNS and Port Configuration

Set the DNS servers that the tracker will use. It is important to ensure that this data is correct for effective communication.

Server 01, Server 02, Server 03: fill in with the appropriate information.

5. Vibration Alarm Activation

Configure the vibration alarm so that the tracker notifies about any unexpected movement. This can be essential for security.

shock123456

6. Tracking Activation

Activate the tracking function so that the device begins to monitor the location in real time. This command is essential for the tracker to function.

tracker123456

7. GPRS Transmission Activation

Enable data transmission via GPRS so that the tracker can send location and status information. This is vital for continuous communication.

gprs123456

8. Transmission Time Setting

Adjust the data transmission time while the equipment is in motion. A 60-second interval is recommended for efficient monitoring.

upload123456 060

The transmission time is adjustable as needed.

9. Sensor Sleep Mode

This mode allows the tracker to enter sleep mode after 5 minutes of inactivity, saving energy. The device will be activated upon detecting movement, receiving an SMS, or a call.

sleep123456 shock

Special commands

Special Commands

Below are some special commands that can be used for additional functionalities of the tracker.

G123456#

where

gprs123456 0

sensitivity123456 + selecionar número 1, 2 ou 3!

check123456

speed123456 080

nospeed123456

shock123456

noshock123456

lowbatsms123456 on

sleep123456 time

sleep123456 shock

sleep123456 off

imei123456

reset123456