How to configure the Coban TK915 device via SMS
This guide shows how to connect the Coban TK915 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.
SMS Commands
1. Equipment Setup Start
To start using the tracker, it is necessary to begin the device configuration. This will ensure that the equipment is ready for use and that all functions are enabled.
begin123456
2. Time Zone Configuration
Adjusting the time zone is essential for the tracker to correctly record the local time. Use the appropriate command to set the desired time zone.
time zone123456 0
3. Carrier APN Configuration
Configuring the APN is crucial for the tracker's connectivity. The APN information, username, and password must be updated correctly, as they vary according to the chip supplier and the carrier used.
apn123456 allcom.br
apn123456 linksolutions.br
apn123456 m2data.arqia.br
apn123456 smart.m2m.vivo.com.br
apn123456 tim.br
apn123456 transmeet.br
apn123456 virtueyes.com.br
apn123456 zap.vivo.com.br
4. DNS and Port Configuration
It is important to configure the DNS servers to ensure stable and efficient communication. Enter the server data as needed.
Server 01, Server 02, Server 03: details to be filled in.
5. Vibration Alarm Activation
The vibration alarm is a useful function to alert about unauthorized movements. Activate it to ensure additional security for your tracker.
shock123456
6. Activate Tracking
For the tracker to function correctly, it is necessary to activate the tracking function. This will allow you to monitor the device's location in real-time.
tracker123456
7. GPRS Transmission Activation
GPRS transmission is essential for the operation of the tracker. Make sure to activate it so that the device can send location data.
gprs123456
8. Transmission Time Setting
You can adjust the data transmission interval. The default time is 60 seconds when the equipment is in motion. Adjust as necessary.
upload123456 060
Adjustable time
9. Power Saving Mode
The tracker can enter power-saving mode after 5 minutes of inactivity. It will be reactivated with any movement or vibration.
sleep123456 shock
Wake-up mode: Movement, SMS or CALL.
Special commands
Special Commands
Here are some special commands that can be used for additional functionalities of the tracker.
G123456#
where
gprs123456 0
sensitivity123456 + selecionar número 1, 2 ou 3!
check123456
speed123456 080
nospeed123456
shock123456
noshock123456
lowbatsms123456 on
sleep123456 time
sleep123456 shock
sleep123456 off
imei123456
reset123456
Own your tracking platform with a one-time payment