How to configure the Coban LK710 device via SMS

This guide shows how to connect the Coban LK710 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Device Setup Start

To start using the tracker, it is necessary to begin the configuration of the equipment. Use the specific command to initiate the process.

begin123456

2. Time Zone Configuration

Adjust the device's time zone to ensure that location information is accurate. The command should be followed by the desired configuration.

time zone123456 0

3. Carrier APN Configuration

It is crucial to correctly configure the APN, username, and password, as this information varies according to the SIM card carrier used. Check the list of commands for different APNs.

apn,m2track.br,vivo,vivo#

apn123456 allcom.br

apn123456 allcom.vivo.com.br

apn123456 brt.br

apn123456 claro.com.br

apn123456 datatem.algar.br

apn123456 eseye.com

apn123456 gprs.amazoniacelular.com.br

apn123456 gprs.oi.com.br

apn123456 gprs.telemigcelular.com.br

apn123456 linksolutions.br

apn123456 m2data.algar.br

apn123456 m2data.arqia.br

apn123456 m2data.vivo.com.br

apn123456 m2m.vodafone.br

apn123456 m2mprepgago.br arqia arqia

apn123456 meta.vivo.com.br meta meta

apn123456 oktor.br

apn123456 sercomtel.com.br

apn123456 smart.m2m.vivo.com.br

apn123456 ss.algar.br

apn123456 tim.br

apn123456 tmdata.tim.br

apn123456 transmeet.br

apn123456 virtueyes.vivo.com.br

apn123456 voxter.algar.br

apn123456 voxter.br

apn123456 wap.ctbc.com.br

apn123456 wl.vivo.com.br

apn123456 y1.m2m.algar.com.br

apn123456 zap.vivo.com.br

Ensure that the data is correct for the proper functioning of the tracker.

4. DNS and Port Configuration

Set the DNS servers and port for communication. This is essential to ensure that the tracker connects correctly to the application server.

SZCS,123456,DOMAIN=central.trackar.com.br:6013

5. GPRS Transmission Activation

For the tracker to send location data, it is necessary to enable GPRS transmission. Use the corresponding command to activate this function.

gprs123456

6. Tracking Mode

Activate the tracking mode so that the device can monitor the location in real-time. This command is essential for the tracker to function.

tracker123456

7. Transmission Interval Configuration

Set the time interval at which the tracker should send location data. The value is adjustable in seconds, and the default is 60 seconds.

upload123456 60

8. Vibration Alarm Activation

Activate the vibration alarm so that the tracker can detect shocks and unwanted movements. This feature is important for the device's security.

shock123456

9. Sensor Sleep Mode

The tracker will enter sleep mode after 5 minutes of inactivity. Any movement or vibration will cause it to return to the active state. Activation mode can be done by movement, SMS, or call.

sleep123456 shock

Special commands

10. Special Commands

Use the special commands to access additional functionalities of the tracker, such as location, status check, and configuration.

G123456

where

check123456

(s42,1234)

status

Param1

Param2

sos

sleep123456 10

sleep123456 shock

nosleep12345

shock123456

noshock123456

pwr1

pwr0

555

666

imei123456

rst

format

These commands allow for more detailed control over the functions of the tracker.