How to configure the Coban LK210 device via SMS

This guide shows how to connect the Coban LK210 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Start Equipment Configuration

To begin the configuration of the LK210 tracker, you must send the start command. This is essential for the device to recognize that the settings are about to be changed.

begin123456

2. Set Time Zone

Adjust the time zone of the tracker to ensure that location data is accurate. This is crucial for precise tracking.

time zone123456 0

3. Configure Carrier APN

The APN configuration is crucial and must be done carefully. APN, username, and password information varies by carrier, so make sure to use the correct data for the SIM card used.

apn,m2track.br,vivo,vivo#

apn123456 allcom.br

apn123456 allcom.vivo.com.br

apn123456 brt.br

apn123456 claro.com.br

apn123456 datatem.algar.br

apn123456 eseye.com

apn123456 gprs.amazoniacelular.com.br

apn123456 gprs.oi.com.br

apn123456 gprs.telemigcelular.com.br

apn123456 linksolutions.br

apn123456 m2data.algar.br

apn123456 m2data.arqia.br

apn123456 m2data.vivo.com.br

apn123456 m2m.vodafone.br

apn123456 m2mprepgago.br arqia arqia

apn123456 meta.vivo.com.br meta meta

apn123456 oktor.br

apn123456 sercomtel.com.br

apn123456 smart.m2m.vivo.com.br

apn123456 ss.algar.br

apn123456 tim.br

apn123456 tmdata.tim.br

apn123456 transmeet.br

apn123456 virtueyes.vivo.com.br

apn123456 voxter.algar.br

apn123456 voxter.br

apn123456 wap.ctbc.com.br

apn123456 wl.vivo.com.br

apn123456 y1.m2m.algar.com.br

apn123456 zap.vivo.com.br

4. Set DNS and Port

It is necessary to configure the DNS server and port to ensure proper communication of the tracker with the server. This data is fundamental for the correct functioning of the device.

SZCS,123456,DOMAIN=central.trackar.com.br:6013

5. Enable GPRS Transmission

Activate data transmission via GPRS so that the tracker can send location and status information in real-time.

gprs123456

6. Activate Tracking Mode

Activate the tracking mode so that the device starts sending location data. This mode is essential for the tracker to function.

tracker123456

7. Set Transmission Interval

Set the time interval for data transmission. This command adjusts the frequency with which the tracker sends information, allowing for more precise control.

upload123456 60

8. Activate Vibration Alarm

Configure the vibration alarm so that the tracker can detect unexpected movements. This will help protect the vehicle against theft or vandalism.

shock123456

9. Sleep Mode by Sensor

Activate the tracker’s sleep mode, which will be triggered after 5 minutes of inactivity. The device will wake up with any movement or vibration, ensuring it is always ready to track.

sleep123456 shock

Special commands

Special Commands

G123456

where

check123456

(s42,1234)

status

Param1

Param2

sos

sleep123456 10

sleep123456 shock

nosleep12345

shock123456

noshock123456

pwr1

pwr0

555

666

imei123456

rst

format