How to configure the Coban LK206A device via SMS

This guide shows how to connect the Coban LK206A tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Start of Configuration

To start the configurations of the LK206A tracker, you must send the initial command. This establishes the connection with the device and allows you to proceed with the other necessary configurations.

begin123456

2. Time Zone Configuration

It is crucial to adjust the time zone of the device according to your location. This ensures that tracking data is accurate in relation to time.

time zone123456 0

3. APN Configuration

Correctly configuring the APN (Access Point Name) is essential for the tracker to connect to the carrier's network. The APN, username, and password information vary according to the chip supplier and the carrier used. Therefore, make sure to enter the correct data.

apn,m2track.br,vivo,vivo#

apn123456 allcom.br

apn123456 allcom.vivo.com.br

apn123456 brt.br

apn123456 claro.com.br

apn123456 datatem.algar.br

apn123456 eseye.com

apn123456 gprs.amazoniacelular.com.br

apn123456 gprs.oi.com.br

apn123456 gprs.telemigcelular.com.br

apn123456 linksolutions.br

apn123456 m2data.algar.br

apn123456 m2data.arqia.br

apn123456 m2data.vivo.com.br

apn123456 m2m.vodafone.br

apn123456 m2mprepgago.br arqia arqia

apn123456 meta.vivo.com.br meta meta

apn123456 oktor.br

apn123456 sercomtel.com.br

apn123456 smart.m2m.vivo.com.br

apn123456 ss.algar.br

apn123456 tim.br

apn123456 tmdata.tim.br

apn123456 transmeet.br

apn123456 virtueyes.vivo.com.br

apn123456 voxter.algar.br

apn123456 voxter.br

apn123456 wap.ctbc.com.br

apn123456 wl.vivo.com.br

apn123456 y1.m2m.algar.com.br

apn123456 zap.vivo.com.br

4. DNS and Port Configuration

It is important to correctly configure the DNS servers and port to ensure that the tracker connects to the tracking platform. The parameters must be defined according to the specifications of the service used.

SZCS,123456,DOMAIN=central.trackar.com.br:6013

5. Enable GPRS Transmission

For the tracker to send location data, it is necessary to enable GPRS transmission. This command activates the feature and allows the tracker to connect to the network.

gprs123456

6. Tracking Mode

Activate tracking mode so that the device starts monitoring location in real-time. This command is essential for the tracker to function correctly.

tracker123456

7. Transmission Time Configuration

Set the interval at which the tracker should send location information. The time can be adjusted as needed, with 60 seconds being the default.

upload123456 60

8. Vibration Alarm Activation

Configure the vibration alarm so that the tracker can detect impacts and movements. This functionality is useful for alerting about possible theft attempts or unwanted movement.

shock123456

9. Sleep Mode by Sensor

Activate sleep mode by sensor so that the tracker enters power-saving mode after 5 minutes of inactivity. It will be activated again upon detecting movement or receiving an SMS or call.

sleep123456 shock

Special commands

Special Commands

In addition to the configuration commands, there are special commands that allow access to additional functionalities of the tracker. These commands help obtain information and manage the device more efficiently.

G123456

where

check123456

(s42,1234)

status

Param1

Param2

sos

sleep123456 10

sleep123456 shock

nosleep12345

shock123456

noshock123456

pwr1

pwr0

555

666

imei123456

rst

format