How to configure the Coban LK106 device via SMS

This guide shows how to connect the Coban LK106 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Start of Configuration

To start using your tracker, you need to initiate the device configuration with the default password.

begin123456

2. Time Zone Configuration

Adjust the tracker's time zone to ensure that location data is accurate.

time zone123456 0

3. APN Configuration

It is essential to configure the APN correctly, as it varies by carrier. Make sure to use the correct information for your carrier.

apn,m2track.br,vivo,vivo#

apn123456 allcom.br

apn123456 allcom.vivo.com.br

apn123456 brt.br

apn123456 claro.com.br

apn123456 datatem.algar.br

apn123456 eseye.com

apn123456 gprs.amazoniacelular.com.br

apn123456 gprs.oi.com.br

apn123456 gprs.telemigcelular.com.br

apn123456 linksolutions.br

apn123456 m2data.algar.br

apn123456 m2data.arqia.br

apn123456 m2data.vivo.com.br

apn123456 m2m.vodafone.br

apn123456 m2mprepgago.br arqia arqia

apn123456 meta.vivo.com.br meta meta

apn123456 oktor.br

apn123456 sercomtel.com.br

apn123456 smart.m2m.vivo.com.br

apn123456 ss.algar.br

apn123456 tim.br

apn123456 tmdata.tim.br

apn123456 transmeet.br

apn123456 virtueyes.vivo.com.br

apn123456 voxter.algar.br

apn123456 voxter.br

apn123456 wap.ctbc.com.br

apn123456 wl.vivo.com.br

apn123456 y1.m2m.algar.com.br

apn123456 zap.vivo.com.br

4. DNS and Port Configuration

Set the DNS servers and port to ensure the tracker's connectivity with the central server.

SZCS,123456,DOMAIN=central.trackar.com.br:6013

5. Enable GPRS Transmission

Activate data transmission via GPRS so that the tracker can send location information.

gprs123456

6. Tracking Mode

Activate tracking mode so that the device starts monitoring your location.

tracker123456

7. Transmission Time Configuration

Set the time interval at which the tracker will transmit data. By default, the time is set to 60 seconds.

upload123456 60

8. Activate Vibration Alarm

Configure the vibration alarm so that the tracker can detect impacts.

shock123456

9. Sleep Mode by Sensor

The device will enter hibernation mode after 5 minutes of inactivity, waking up with any movement or vibration.

sleep123456 shock

Special commands

Special Commands

Here are some special commands that can be used to manage the tracker efficiently.

G123456

where

check123456

(s42,1234)

status

Param1

Param2

sos

sleep123456 10

sleep123456 shock

nosleep12345

shock123456

noshock123456

pwr1

pwr0

555

666

imei123456

rst

format