How to configure the Coban GPS102B device via SMS

This guide shows how to connect the Coban GPS102B tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Start of Configuration

To begin using your Coban GPS102B GPS tracker, it is essential to start the device configuration. This is the first step to ensure that all functionalities are operational.

begin123456

2. Time Zone Configuration

Adjusting the time zone of your tracker is essential for accurate location information. Use the appropriate command to set the desired time zone.

time zone123456 0

3. APN Configuration

Configuring the APN (Access Point Name) is crucial for the tracker’s communication with the carrier network. APN, username, and password information may vary between different carriers, so it is important to enter the correct data.

apn123456 allcom.br

apn123456 linksolutions.br

apn123456 m2data.arqia.br

apn123456 smart.m2m.vivo.com.br

apn123456 tim.br

apn123456 transmeet.br

apn123456 virtueyes.com.br

apn123456 zap.vivo.com.br

4. DNS and Port Configuration

In this step, you must configure the DNS servers and port that will be used by the tracker. This information is essential to ensure a stable connection.

Server 01:

Server 02:

Server 03:

5. Vibration Alarm Activation

The vibration alarm is a feature that allows the device to notify the user about unexpected movements. It is an important functionality for security.

shock123456

6. Tracking Activation

For the tracker to start monitoring the location, it is necessary to activate the tracking function. This will allow you to receive real-time information.

tracker123456

7. GPRS Transmission Activation

GPRS transmission is the method by which the tracker sends data to the center. It is important to activate this function so that the information can be transmitted.

gprs123456

8. Transmission Time Setting

You can set the time interval for data transmission while the tracker is in motion. The default is 60 seconds, but it can be adjusted as needed.

upload123456 060

Adjustable time

9. Sleep Mode by Sensor

This mode allows the tracker to enter hibernation mode after 5 minutes of inactivity, saving battery. The device can be activated again by movement, SMS, or call.

sleep123456 shock

Description: The tracker will sleep after 5 minutes of inactivity. Any vibration/movement/shake will cause the tracker to 'wake up'.

Special commands

10. Special Commands

Below are some special commands that can be used for additional functionalities of the tracker.

G123456#

where

gprs123456 0

sensitivity123456 + selecionar número 1, 2 ou 3!

check123456

speed123456 080

nospeed123456

shock123456

noshock123456

lowbatsms123456 on

sleep123456 time

sleep123456 shock

sleep123456 off

imei123456

reset123456