How to configure the Coban GPS-103-A device via SMS

This guide shows how to connect the Coban GPS-103-A tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Start Equipment Configuration

To begin using the GPS tracker, it is necessary to start the device configuration. This process is essential to ensure the proper functioning of the equipment.

begin123456

2. Time Zone Configuration

Adjust the time zone of the tracker so that the location information is correct in relation to the local time. This is essential for accurate tracking.

time zone123456 0

3. Carrier APN Configuration

It is crucial to update the APN, username, and password information according to the carrier of the SIM card used. This data varies by provider, so check the correct information.

apn123456 allcom.br

apn123456 linksolutions.br

apn123456 m2data.arqia.br

apn123456 smart.m2m.vivo.com.br

apn123456 tim.br

apn123456 transmeet.br

apn123456 virtueyes.com.br

apn123456 zap.vivo.com.br

4. DNS and Port Configuration

For the proper functioning of the tracker, it is necessary to configure the DNS servers. This ensures that the device connects correctly to the network.

Servidor 01:

Servidor 02:

Servidor 03:

5. Vibration Alarm Activation

The vibration alarm is an important feature that alerts about unwanted movements. Activate this function to increase the security of your tracker.

shock123456

6. Activate Tracking

To allow the device to start tracking the location, it is necessary to activate the tracking function. This allows you to monitor the equipment in real time.

tracker123456

7. Activate GPRS Transmission

Activating GPRS transmission is essential for the tracker to send location data via the cellular network. This configuration is fundamental for the device's operation.

gprs123456

8. Set Transmission Time

Adjust the time interval for data transmission. A time of 60 seconds is recommended when the equipment is in motion, ensuring frequent updates.

upload123456 060

Adjustable time

9. Sleep Mode by Sensor

This mode allows the tracker to enter hibernation mode after 5 minutes of inactivity. The device will be reactivated upon detecting movement, vibration, or a call.

sleep123456 shock

The tracker will 'wake up' with movement, SMS, or call.

Special commands

Special Commands

These additional commands provide extra functionalities for the tracker, allowing for more comprehensive control.

G123456#

where

gprs123456 0

sensitivity123456 + selecionar número 1, 2 ou 3!

check123456

speed123456 080

nospeed123456

shock123456

noshock123456

lowbatsms123456 on

sleep123456 time

sleep123456 shock

sleep123456 off

imei123456

reset123456