How to configure the Coban Coban GPS304 device via SMS

This guide shows how to connect the Coban Coban GPS304 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Start of Configuration

To start using your tracker, it is essential to begin configuring the device. This will ensure that all functionalities are active and ready for use.

begin123456

2. Time Zone Configuration

Adjusting the time zone is essential for the tracker to correctly log the times of activities. Use the appropriate command to set the desired time zone.

time zone123456 0

3. APN Configuration

Configuring the APN is crucial for the tracker to connect to the carrier's network. APN information, username, and password must be entered correctly, as they vary depending on the chip provider and the carrier used.

apn123456 allcom.br

apn123456 linksolutions.br

apn123456 m2data.arqia.br

apn123456 smart.m2m.vivo.com.br

apn123456 tim.br

apn123456 transmeet.br

apn123456 virtueyes.com.br

apn123456 zap.vivo.com.br

4. DNS and Port Configuration

To ensure a stable connection, it is necessary to configure the DNS servers. This step is important for precise communication and location.

Server 01: Server 02: Server 03:

5. Vibration Alarm Activation

The vibration alarm is an important feature that alerts about unauthorized movements. Activate it to increase the security of your tracker.

shock123456

6. Tracking Activation

For the tracker to function correctly, it is necessary to activate the tracking function. This will allow you to monitor the device's location in real-time.

tracker123456

7. GPRS Transmission Activation

GPRS transmission is essential for the tracker to send location data. Activating it will ensure that you receive the necessary information.

gprs123456

8. Transmission Time Setting

You can adjust the time interval for data transmission. A time of 60 seconds is recommended for tracking in motion.

upload123456 060

Adjustable time

9. Sensor Sleep Mode

This mode allows the tracker to enter hibernation after 5 minutes of inactivity. It will be reactivated automatically with any movement or vibration.

sleep123456 shock

Wake-up mode: Movement, SMS or CALL.

Special commands

10. Special Commands

There are special commands that can be used for additional functions of the tracker. These commands allow access to information and adjustment of specific settings.

G123456#

where

gprs123456 0

sensitivity123456 + selecionar número 1, 2 ou 3!

check123456

speed123456 080

nospeed123456

shock123456

noshock123456

lowbatsms123456 on

sleep123456 time

sleep123456 shock

sleep123456 off

imei123456

reset123456